parts from 81 to 73
I found an 81 1500 with a very nice interior and a very good complete box that I would like to put on my 73 2500. Can anyone confirm that they are the same? I'm getting mixed answers on this when researching on the web.
|
Re: parts from 81 to 73
Quote:
|
Re: parts from 81 to 73
I can live with that, my 73 has two fuel tanks already, just as long as the rest of box is the same. How about the carpet and seats? Guessing I can make the seats work, but carpet different?
|
Re: parts from 81 to 73
Quote:
|
Re: parts from 81 to 73
About the carpet--
I don't think it's a year thing, but there are high tunnel and low tunnel floors. I don't know if it has to do with 2x4/4x4, or if it's manual/automatic. Maybe someone else can shed some light on this. |
Re: parts from 81 to 73
73-80 and 81-87 are the compatible years. Like the guys above said a lot of what you have will work but its going to take some work on most the parts.
|
Re: parts from 81 to 73
You will make the purists cringe, but it can be made to work. 81-87, and 73-80 are very different cosmetically on the inside and out. You will also need to take the guage cluster out of the '81 truck too, because the 73-80 gauge bezel wont fit it. The tailgate on the '81 will look much different than a '73, but still work. Your end result will basically be an '81 with a '73 front clip. Perhaps you could take the drive train out of your '73, and put it in the '81, So you dont have to do as much mix, and match work. This would be the easiest route, without ending up with too much of a Frankenstein truck. Good luck.
|
Re: parts from 81 to 73
Sorry, I forgot about the truck being a 2500, perhaps you could do an entire body swap, and make the cab transmission hump larger. Then have the VIN numbers of both vehicles merged.
|
All times are GMT -4. The time now is 06:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com