Restoring vent window's photos.
3 Attachment(s)
Attachment 1643922
Attachment 1643923 h]1643924[/attach]. Bought this rivet press. Works like a charm. Restored two vent windows in six hours. All new rubber's new glass run channel. |
Re: Restoring vent window's photos.
Restored vent window's.precision rubber products for the seal's. Replaced the glass run channel that is riveted to the vent window.installed the vent window and side window with no paint damage. The complete job took two men eight hours.
|
Re: Restoring vent window's photos.
Do you have any more photos? I've been needing to do this i changed the rest on the door already.i have the seals and the rivets but am lost at where to start.
|
Re: Restoring vent window's photos.
Do you have the vent windows out? I do have some pictures but if can answer any questions or help at all let me know. I have done a few of these and there are a few tricks to help. I can loan you the rivet tool if you like. We would need to work out a security deposit because it cost me a hundred bucks. Let me know if you need help.
|
Re: Restoring vent window's photos.
I would be interested in lots of pictures and any tips and tricks, too. I've bought the weatherstrip, rivets, and rivet tool (not as fancy as yours, mine is just a type of punch) from GMCPauls.
|
Re: Restoring vent window's photos.
You will need the punch to get to some that the rivet tool will not reach. The tool just makes it less work. Pm me and we can exchange phone numbers. We can talk faster than I can type.
|
Re: Restoring vent window's photos.
Care to share where ya found that jewel, the punch type is not friendly !
|
Re: Restoring vent window's photos.
sub'd
|
Re: Restoring vent window's photos.
I'm getting a deal I can't refuse. I was going to send them out. I got hooked up with a vintage window guy, and he's charging me $260 to install ALL the windows, including new rubber for the vent windows. Wasn't looking for anyone to install the roll-ups or vent windows, but...........Okay.
|
Re: Restoring vent window's photos.
SUVILLE It's called a areo- rivet tool from ZIP CORVETTE PART'S. On sale for 79. 95
|
Re: Restoring vent window's photos.
Quote:
|
Re: Restoring vent window's photos.
Just a hint I sold the rivet tool that was set up for air chisel you only need 2 hands and takes about 20 mins
Posted via Mobile Device |
1 Attachment(s)
Quote:
|
Quote:
Posted via Mobile Device |
Re: Restoring vent window's photos.
The bottom pivot rod on my passenger side is broken. Can I repair/replace it or do I need a whole new window frame?
|
Re: Restoring vent window's photos.
You will probably need a new vent window. Tinted or clear glass?
|
Re: Restoring vent window's photos.
1 Attachment(s)
I've used the typical pop rivet tool in the past with an extention but I wonder if a brake rivet tool like this would work - USA made and less expensive https://www.aircraftsupply.com/ra825.html
|
Re: Restoring vent window's photos.
Quote:
|
Re: Restoring vent window's photos.
Quote:
Nice find...I bet it would work too! |
Re: Restoring vent window's photos.
Quote:
|
All times are GMT -4. The time now is 05:38 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com