67 C10 want to do coil over conversion.. bye bye air bags
1 Attachment(s)
anyone here in the suspension community have any ideas for me?
looking for 1" narrower arms with a coilover kit..removing air bags and dont have any room due to the wheel offset. Thanks!! |
Re: 67 C10 want to do coil over conversion.. bye bye air bags
You should only have 1 thread going at a time. It can get confusing.
http://67-72chevytrucks.com/vboard/s...d.php?t=827288 http://67-72chevytrucks.com/vboard/s...d.php?t=827289 |
Re: 67 C10 want to do coil over conversion.. bye bye air bags
anyone here in the suspension community have any ideas for me?
looking for 1" narrower arms with a coilover kit..removing air bags and dont have any room due to the wheel offset. Thanks!! |
Re: 67 C10 want to do coil over conversion.. bye bye air bags
Quote:
The other option would be to go with any of the aftermarket full crossmember setups. Most will narrow the track width 1.5'' on each side. Modern steering, lighter, etc. Only issue is the cost. |
Re: 67 C10 want to do coil over conversion.. bye bye air bags
1 Attachment(s)
Quote:
This will also center the front wheels in the wheel opening, which it looks like you need. Look at this thread. http://67-72chevytrucks.com/vboard/s...+blue&page=100 This is the lowest Porterbuilt ride height with coil overs. |
Re: 67 C10 want to do coil over conversion.. bye bye air bags
Quote:
|
All times are GMT -4. The time now is 10:34 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com