The 1947 - Present Chevrolet & GMC Truck Message Board Network - NOS Tail Light Bezel Clips and Other Hardware for asolde

Page 1 of 4

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - NOS Tail Light Bezel Clips and Other Hardware for asolde (https://67-72chevytrucks.com/vboard/showthread.php?t=698537)

Classic Bowties

02-21-2016 02:52 AM

NOS Tail Light Bezel Clips and Other Hardware for asolde

4 Attachment(s)

Alex, here is that requested hardware once again. The NOS tail light bezel clips come GM boxed in qty. 14 so will ship loose w/o box unless you want all 14. The below pictured reduced head chrome plated screws and matching ferrules are repro U.S. made pieces, they are the closest we could find to what GM originally used and are alot nicer than what the big catalog companies supply. Will ship any clip/screw combination to TX. for $4. sent USPS first class or $6.80 for USPS priority. Thanks, Mel. :chevy:

NOS tail light bezel clips / $6. ea. *NOS Clip Quantity Limited As Of 02/28/16* *Now Sold Out As Of 03/02/16*
Repro tail light bezel mounting clips 8 pc. set / $9.
Repro tail light bezel screws & ferrules 8 pc. set / $4.
Repro paint divider molding mounting clips 12 pc. set / $7. (pictured in post #2)
Repro paint divider clip screw in shoulder studs 12 pc. set / $6. (pictured in post #38)
Repro side marker lens mounting screws & clips 16 pc. set / $7. (pictured in post #40)

Classic Bowties

02-21-2016 03:28 AM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

2 Attachment(s)

For anyone else needing or looking, here are the rear of cab paint divider molding clips from that same/other vanishing thread. These are the repro clips that snap onto the rear of cab studs, each LH/RH divider molding uses 6 clips for mounting. Selling by clip set Qty. 12 for $6. plus ship. Thanks, Mel :chevy:

asolde

02-21-2016 06:48 AM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Thanks Mel pay pal sent for a set of clips 8 and a set of screws with the ferrules. Please send priority mail. Thanks Alex

Jeff's bowtie's

02-21-2016 10:23 AM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Mel I'll take 2 sets of 12 clips for the paint divider shipped to 25430 let me know what the total is and I'll get mo out tomorrow pm your address thanks Jeff

Classic Bowties

02-21-2016 07:43 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Quote:

Originally Posted by Jeff's bowtie's (Post 7493866)

Mel I'll take 2 sets of 12 clips for the paint divider shipped to 25430 let me know what the total is and I'll get mo out tomorrow pm your address thanks Jeff

Hey Jeff, two sets of clips come to $12., your shipping options are $4. sent USPS first class in a cushion mailer or $6.80 sent in a USPS priority small box. Thanks, Mel. :chevy:

Jeff's bowtie's

02-21-2016 07:52 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Hey Mel I'll do the $4.00 option for a total of $16.00 thanks Jeff

Cash3481

02-21-2016 10:12 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Mel,
1. Do you have enough rear taillight clips for 2 sets?
2. I'll take 2 sets of paint divider clips as well please!
3. I will also get 2 sets of twilight screws and ferrels too...
Please let me know the price shipped to 67110 and your PayPal total.
Thanks In advance...

Classic Bowties

02-21-2016 10:36 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Quote:

Originally Posted by Cash3481 (Post 7494619)

Yes, we can supply you with that list. Your parts cost would come to $90. (breakdown below), and will combine ship all of it for $6.80 sent USPS priority. Thanks, Mel. :chevy:

$72. / Qty. 16 NOS tail light bezel clips @ $4.50 ea.
$ 6. / Qty. 2 Repro tail light bezel screw & ferrule sets @ $3. ea.
$12. / Qty. 2 Repro paint divider molding clip sets @ 6. ea.
$90.

cst204x4

02-21-2016 11:59 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

I will take a set of paint divider clips (12) shipped to 48817 let me know total

Classic Bowties

02-22-2016 01:38 AM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Quote:

Originally Posted by cst204x4 (Post 7494790)

I will take a set of paint divider clips (12) shipped to 48817 let me know total

One set of repro paint divider mold clips would be $6., your shipping options are $4. sent USPS first class in a cushion mailer or $6.80 sent in a USPS priority small box. Payment info for sending funds via paypal sent. Thanks, Mel. :chevy:

Cash3481

02-22-2016 10:07 AM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Quote:

Originally Posted by Classic Bowties (Post 7494658)

Payment sent and PM'd my address as well.

Jeff's bowtie's

02-22-2016 11:04 AM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Hey Mel I'll take 8 Nos taillight bezel clips and a set of screws and ferrules thanks Jeff

timmoser

02-22-2016 02:19 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

I will take a set of paint divider clips , to 27235 NC

Classic Bowties

02-23-2016 05:52 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Quote:

Originally Posted by asolde (Post 7493792)

Thanks Mel pay pal sent for a set of clips 8 and a set of screws with the ferrules. Please send priority mail. Thanks Alex

Your requested hardware is under way, package went out USPS priority insured yesterday, Mon. 02/22. The projected delivery date listed on the postal receipt is Thurs. 02/25. Thanks

Quote:

Originally Posted by cst204x4 (Post 7494790)

I will take a set of paint divider clips (12) shipped to 48817 let me know total

The repro paint divider clips are headed your way, package went out USPS first class yesterday, Mon. 02/22. The projected delivery date listed on the postal receipt is Fri. 02/26. Thanks

Quote:

Originally Posted by Cash3481 (Post 7495098)

Payment sent and PM'd my address as well.

Your requested hardware is headed your way, package went out USPS priority insured yesterday, Mon. 02/22. The projected delivery date listed on the postal receipt is Thurs. 02/25. Thanks again, Mel. :chevy:

Classic Bowties

02-23-2016 06:04 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Quote:

Originally Posted by Jeff's bowtie's (Post 7493866)

Mel I'll take 2 sets of 12 clips for the paint divider shipped to 25430 let me know what the total is and I'll get mo out tomorrow pm your address thanks Jeff

Quote:

Originally Posted by Jeff's bowtie's (Post 7495150)

Hey Mel I'll take 8 Nos taillight bezel clips and a set of screws and ferrules thanks Jeff

Hey Jeff, after your add on's the new hardware total is broken down below, will combine ship all of it for $6.80 sent USPS priority insured/small flat rate box. Thanks, Mel. :chevy:

$12. / Qty. 2 Repro paint divider molding clip sets @ 6. ea.
$36. / Qty. 8 NOS tail light bezel clips @ $4.50 ea.
$ 3. / Qty. 1 Repro tail light bezel screw & ferrule set
$51.

Classic Bowties

02-23-2016 06:19 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Quote:

Originally Posted by timmoser (Post 7495350)

I will take a set of paint divider clips , to 27235 NC

One set of repro paint divider molding clips would be $6., your shipping options are $4. sent USPS first class in a cushion mailer or $6.80 sent in a USPS priority small box. If the priority small box is chosen, theres lots of room left over for other small items, we have pretty good amount of other 67-72 specific hardware on hand but not listed here if needing/looking for anything else. Let me know how you would like to send payment and I can take care of things on our end. Thanks, Mel. :chevy:

Jeff's bowtie's

02-23-2016 06:58 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Hey Mel thanks again and money order has been sent thanks Jeff

Undone

02-24-2016 08:47 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

I'll take 2 sets (12)of cab paint divider molding clips and one set (4)of tail light bezel screw and ferrule set.

Ed F	02-24-2016 10:32 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

I have an nos pair of tail light bezels to replace the dented ones on one of my trucks. I assume I will need 4 screws and washers. How many clips will I need? Also wondering how to remove the old bezels without doing more damage to them. Thanks, Ed

Minnz

02-25-2016 01:58 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Is there still availability for (?):

1 set of NOS tail light bezel clips (8 clips)
1 set of screw/ ferrule combo

Shipped to 55443.

Thanks!

D.PASSMORE

02-25-2016 03:30 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

I'll take 3 sets of paint divided clips./ 1 sets taillight screws and ferrules. Pm me your info. Thx

Classic Bowties

02-28-2016 11:19 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Quote:

Originally Posted by Jeff's bowtie's (Post 7496887)

Hey Mel thanks again and money order has been sent thanks Jeff

Jeff, your requested hardware is under way, package went out USPS priority insured on Fri. 02/26. The projected delivery date listed on the postal receipt is tomorrow-Mon. 02/29. Thanks again, Mel.:chevy:

Classic Bowties

02-28-2016 11:55 PM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Quote:

Originally Posted by Undone (Post 7498276)

I'll take 2 sets (12)of cab paint divider molding clips and one set (4)of tail light bezel screw and ferrule set.

Quote:

Originally Posted by Ed F (Post 7498422)

Ed, yes as listed/pictured in first post one tail bezel screw/ferrule set (for two bezels) is four of each item. For two T/L bezels, a quantity of 8 mounting clips would be needed. Please confirm if wanting the clips in GM NOS or repro, for now I will put you inline for an NOS set but at this time we are only going to be offering a couple of more set of these GM tail bezel mounting clips. I need to keep some on hand for future projects and or to sell/offer along with our NOS tail light bezels. Quantity on hand was limited in the first place, I very much misjudged interest between both this thread and the disappearing one and also over the phone sales over the last five days. Let me know

Quote:

Originally Posted by Minnz (Post 7499123)

Is there still availability for (?):

1 set of NOS tail light bezel clips (8 clips)
1 set of screw/ ferrule combo

Shipped to 55443. Thanks!

Please see above reply about the limited supply on the NOS T/L bezel mounting clips. At this time we can set you up with your requested hardware (listed below), will combine ship all of it for $6.80 sent USPS priority insured/small flat rate box. Thanks, Mel. :chevy:

$36. / Qty. 8 NOS tail light bezel clips @ $4.50 ea.
$ 3. / Qty. 1 Repro tail light bezel screw & ferrule set
$39.

Also, did you ever find/locate the NOS rear lenses that you had requested in one of our other threads? We are getting ready to pull some NOS lenses out of inventory to list.

Classic Bowties

02-29-2016 12:20 AM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Quote:

Originally Posted by D.PASSMORE (Post 7499216)

I'll take 3 sets of paint divided clips./ 1 sets taillight screws and ferrules. Pm me your info. Thx

David, three sets of repro paint divider molding clips (36) would be $18. plus $3. on the T/L bezel screw/ferrule set, your shipping options are $4. sent USPS first class in a cushion mailer or $6.80 sent in a USPS priority small box. Are all of your requested molding clips going on original paint divider molding cabs?Asking because we also have a speacial screw in shoulder stud available for mounting these clips on non-original paint divider cabs. We just sent our payment info for sending funds via paypal. Thanks, Mel. :chevy:

Ed F	02-29-2016 08:23 AM

Re: NOS Tail Light Bezel Clips and Other Hardware for asolde

Quote:

Originally Posted by Classic Bowties (Post 7503252)

Yes we can supply you with your list, please confirm quantity though. Two sets of the divider trim clips would be 24 clips. One set of the bezel screws and ferrules would be as you have listed 4 of each.

Ed, yes as listed/pictured in first post one tail bezel screw/ferrule set (for two bezels) is four of each item. For two T/L bezels, a quantity of 8 mounting clips would be needed. Please confirm if wanting the clips in GM NOS or repro, for now I will put you inline for an NOS set but at this time we are only going to be offering a couple of more set of these GM tail bezel mounting clips. I need to keep some on hand for future projects and or to sell/offer along with our NOS tail light bezels. Quantity on hand was limited in the first place, I very much misjudged interest between both this thread and the disappearing one and also over the phone sales over the last five days. Let me know

Please see above reply about the limited supply on the NOS T/L bezel mounting clips. At this time we can set you up with your requested hardware (listed below), will combine ship all of it for $6.80 sent USPS priority insured/small flat rate box. Thanks, Mel. :chevy:

$36. / Qty. 8 NOS tail light bezel clips @ $4.50 ea.
$ 3. / Qty. 1 Repro tail light bezel screw & ferrule set
$39.

Also, did you ever find/locate the NOS rear lenses that you had requested in one of our other threads? We are getting ready to pull some NOS lenses out of inventory to list.

Yes I would like nos, pm the details please.

All times are GMT -4. The time now is 11:44 AM.

Page 1 of 4

Show 40 post(s) from this thread on one page