Re: Front End Rebuild
Hey I'm thinking of doing this to my 69 would like to find a basic kit to do this where you going for parts local or internet?
|
Re: Front End Rebuild
Quote:
|
Re: Front End Rebuild
Subscribed!
|
Re: Front End Rebuild
looking good so far!
|
Re: Front End Rebuild
Took way too long!!
All cleaned up http://www.northbayautorepair.com/images/truck26.JPG http://www.northbayautorepair.com/images/truck27.JPG New stance, needless to say, I need to bring the rear down a little. To get this stance, I cut two coils from the front springs and removed three leafs from the rear (left the two top and the overload springs). Two coils out of the front springs was too much I think. I now need to grind off the bump stop stands, so they will stop hitting the crossmember. http://www.northbayautorepair.com/images/truck28.JPG http://www.northbayautorepair.com/images/truck29.JPG |
Re: Front End Rebuild
Oh, new (used) wheels and tires too :-)
|
Re: Front End Rebuild
And yes, those tie rod ends are for a 1/2 ton, Kanter strikes again :-(
I used them anyway because it needed to be drivable. |
Re: Front End Rebuild
Looks much better lowered down in the front! Now I would just bring down the back a bit more and it would look even better!
|
Re: Front End Rebuild
I need to remove the bump stop mounts from the LCA's. Is it true that I just need to drill out the spot welds and they will come off? I would rather do that than cut them off.
|
Re: Front End Rebuild
Removed the bump stop mounts today by drilling out the spot welds with a 1/4 drill bit and a BFH. No more hitting the crossmember!!! Yay!!!
|
Re: Front End Rebuild
That .................. looks .............. sooooo good! Now just hop on a plane to South Dakota and do mine..ohh btw, bring a shovel for the snow! Awesome-thanks for posting
|
Re: Front End Rebuild
Cutting 2 full coils off your front springs, is the equivalent of a 4" drop spring.
(1/2 coil = 1" of drop) I think you will have issues when it comes time to align the front suspension. POL (www.performanceonline.com) sells a C20 drop spindle, that would improve your ride quality. |
Re: Front End Rebuild
^^Thanks for the info. I'm definitely planning to do something like that when I get the money.
|
All times are GMT -4. The time now is 06:14 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com