Name that bolt/nut/screw size
I've been having problems finding fastener information while rebuilding my ride. I thought it would nice to have all this information in one thread. Since this is the blazer/jimmy section, lets try and get mainly info for them, but info that's the same for trucks is welcome.
So, what the bolt is for, size-thread pitch, type head. Qty needed may be helpful as well. Double wall top visor bolt, 5/16-18, 2.375 long with 1.375 shoulder, hex, qty 2 bed bolts, 5/16-18, .875 or 1.00 long, w/washer, hex, qty 10 top to bracket, 5/16-18, .625 long, w/lock washer, panhead phillips #3, qty 4 frame to bracket, 5/16-18, 1.00 long, w/small washer, hex, qty 2 rear plate, 5/16-18, 1.00 long, hex, qty 6 Single wall top Bed bolts, 3/8-??, ?? long Visor bolts, 5/16-18, 1.00 long, oval head with custom .50 dia head, #2 phillips (cant find these anywhere) gasket to top of a-post, ??? qty 6 door sill plate screws, #8x1.00 panhead #2, qty 8 Pass Seat to floor, 5/16-??, 1.00 long, qty 6 Drivers seat to floor, 5/16-??, Rear seat to floor front bkt, ??, ??, Qty 2 Rear seat to floor rear bkt, ??, ??, Qty 4?? |
Re: Name that bolt/nut/screw size
I have to pull my 1/2 top off to get to the windshield bolts, might take awhile as im elbow deep in my build. Ill try to get to it Saturday
|
Re: Name that bolt/nut/screw size
Quote:
|
Re: Name that bolt/nut/screw size
ADD:
Rear Interior Spare Tire rack to floor? qty 4,???, ??? |
Re: Name that bolt/nut/screw size
If you know it, add it. Mine has the holes, but no rack or bolts.
|
Re: Name that bolt/nut/screw size
Subscribing. I need all the rear seat bolts as well.
|
Re: Name that bolt/nut/screw size
Quote:
|
Re: Name that bolt/nut/screw size
Quote:
Quote:
|
Re: Name that bolt/nut/screw size
Quote:
|
Re: Name that bolt/nut/screw size
Awesome, thanks! I am sure I will think of more.
|
Re: Name that bolt/nut/screw size
This was meant for everyone to post what they know. But since I need help, I help others back.
|
Re: Name that bolt/nut/screw size
Sub'd. Great post.
|
Re: Name that bolt/nut/screw size
Visor to windshield post screw
5/16-18 jackson panhead phillips screw, around .75 or 1.00 long. Very hard to find, however thanks to user bluek5, he found a place here. At the moment they are out, but I have a feeling if many people start placing an order, some will come into stock. http://www.msc-stainless-fasteners.c...on-screws.html Anyone know what screw is used to hold the hatch handle to the hatch? |
Re: Name that bolt/nut/screw size
2 Attachment(s)
Good idea for a thread! Pics are a huge help and salvage yard trucks are a wealth of OEM screw/bolt info with regard to type, size, and finish.
Here's the correct bolt w captured washer to affix the e-brake bracket at the dash. Pics show one I just had Parkerized and another installed. There are a few other such unique bolts/screws I can think of, will try to post more. |
Re: Name that bolt/nut/screw size
This is a great thread idea. Subscribed. I'll contribute where I can.
|
Re: Name that bolt/nut/screw size
4 Attachment(s)
More unique screws/bolts: 12 point screw to attach the hood latch to rad support (note the cool anchor on the head! - not all had these), Phillips head screw to attach the door latch, and trim screw/ferrule to attach a 72 door panel all shown in correct finish
|
Re: Name that bolt/nut/screw size
I wondered how the ebrake release was attached. Mine just flops around. Now I know :)
|
Re: Name that bolt/nut/screw size
2 Attachment(s)
Example pics of the screws used to affix the cowl: stainless on top, Parkerized with a captured washer (same as those used to affix the glove box hinge to the dash) under the hood at the cowl to hood seal.
|
Re: Name that bolt/nut/screw size
deadhead, could you post thread size and lengths on some of these?
Specifically, I'm interested in the one for the ebrake setup. But would like all of them for others restoration projects, even if they cant get the originals. Atleast some off the shelf. |
Re: Name that bolt/nut/screw size
Quote:
|
Re: Name that bolt/nut/screw size
2 Attachment(s)
Correct (non)finish on the 9/16" bolts for the door striker plates, which use star washers
|
Re: Name that bolt/nut/screw size
Can anyone hook me up with specs for the original hatch handle screws?
|
Re: Name that bolt/nut/screw size
could also use info on the correct gravel guard nuts/bolts.
|
Re: Name that bolt/nut/screw size
Quote:
Quote:
|
Re: Name that bolt/nut/screw size
Ty
|
All times are GMT -4. The time now is 10:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com