Re: The 60-66 "PAYING IT FORWARD" thread!
 

Parking brake cable pending to jtrichard.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

scott657 just grabbed my free bench seat...its cool to see this thread taking off.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I still have the wheels in post #1... someone must need them!

Re: The 60-66 "PAYING IT FORWARD" thread!
 

What kinda condition is it in?

Re: The 60-66 "PAYING IT FORWARD" thread!
 

This cool, great to see and the best thing is it working, go through my stuff and post asap.:canada:

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Great Thread !!


Is this glove box still around ??

Re: The 60-66 "PAYING IT FORWARD" thread!
 

ChiefRocka,

If your asking about the glove box door I had it's no longer available.

Thanks,

Pappyx4!

Re: The 60-66 "PAYING IT FORWARD" thread!
 

My box is spoken for. Sorry chief.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

just finished doing a 396bb/t56 swap on my 66 gmc. pulled out the original 305e v6/3spd so now I have a really huge paperweight. still at his house so I cant take pics right now. was going to just take it to the scrap yard but I saw this thread and figured there might be someone out there crazy about those engines. will not ship.

engine/trans is located in woodbine, MD. brief history: bought the truck about 6 months ago in middle of Virginia. the po said he had been driving it and had installed sunpro gauges, holley 500, and a hurst floor shifter. on the journey home, I was watching those gauges like a hawk. but behold, no big issues the whole way back, although I noticed it had a clunking noise in the trans when taking off in 1st or R. oil pressure was good, never overheated, didn't get pulled over, didn't fall apart at 70mph on the highway, couldn't have gone any better. so after getting real tags, I continued to drive the truck and slowly getting more confident the longer I drive it without having any issues, other than the clunking noise, but I still used first and reverse just fine. I started with doing a front power disc brake kit and ran all new lines, kept the stock rear drums. the typical pesky safety stuff. love the truck, cant stand having to wait for a huge gap in traffic just to pull out on the highway without getting hit. so 6 months later, when my buddy pulled his 396 out of his Camaro, I got a good deal on it, plus the t56 he was going to put behind it but never did.

so now its all said and done (well not really, but to the drivable stage), I have a big ass engine and trans sitting at my buddys house and he wants his garage back. from what I have seen on craigslist, im not even gonna bother listing it, more of a come get it or it goes to the scrapyard deal.

on another note, I think this is an awesome thread idea and much thanks to the members of this forum. even though I have never posted, you guys have helped me through my brake swap and engine/trans swap with very useful info. I managed to avoid issues that I never even knew I would run into before even tearing into it.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

So here's a long shot.. Do you still have the roofs??

Re: The 60-66 "PAYING IT FORWARD" thread!
 

It went to someone local who is supposed to get it soon. Once I replace my cab I will have another roof(that one is dented though).

Re: The 60-66 "Pay It Forward" thread!
 

I might be able to use these on my stock '63 C10. I haven't had it too long. I noticed several lug bolts missing and the drums are pretty rust coated. I'll take the wheels off this weekend, check it out and get back to you. I am in Brea.

Re: The 60-66 "Pay It Forward" thread!
 

bump!

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Re: The 60-66 "Pay It Forward" thread!
 

Yep, I could use these. Just a matter of getting over to you to pick them up. I'll send you a PM.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

This is such a great forum!! Thanks, Aero, for keeping Zane's Ride in mind. You are great!

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Great idea... :-)

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Spookylynx, PM SENT

Re: The 60-66 "PAYING IT FORWARD" thread!
 

***Found a new home Thanks to 1963c-10***

I don't know exactly what there called. There the overload spring brackets that mount to the frame in rear. If someone wants them just pay for shipping. I do not have the springs.

I borrowed a picture from another member to show where they mount.

http://i17.photobucket.com/albums/b7...0/IMG_0259.jpg
http://i17.photobucket.com/albums/b7...2011.14.49.jpg

Re: The 60-66 "PAYING IT FORWARD" thread!
 

I'll take them if they are still available. Any chance you have the pads the springs rest on to go with them? They mount on the trailing arms. They are auxiliary springs.....and shipping to 28306?

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Sorry these are all I have. I should be able to ship them in a medium flat rate box. $11.65 for shipping. Paypal ID my62beetle@yahoo.com. Or to send a money order Pm for my address.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

Sounds good. Ill send paypal and address in about two minutes. Thanks

Re: The 60-66 "PAYING IT FORWARD" thread!
 

for anyone looking, the cab and engine are taken, so is the shifter linkage.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

O.K. Here we go. I have a Sportsliner Camper for a Long Fleet that I grabbed a few years ago with the intent of fitting it to my Long Step. I never got time to do it. There's a couple of small holes in the roof (they were there when I got it) that could use some aluminum sheet and pop rivets. The side glass is missing but is an easy square cut, front glass and gasket are missing BUT.. the back door which is in great shape still has the window and gasket for a template. The back door mechanism works great but I don't have the keys. This would make a great period correct topper for someone. Free to anyone on this site that wants to come by and save it. Please don't scrap this thing.

Re: The 60-66 "PAYING IT FORWARD" thread!
 

By the way, it came off of a '62 Long Fleet.