Fuel & Brake line chassis tabs/clips
Building a new chassis. Need ideas for fuel (1/2") and brake line tabs or clips. Want to get them planned before welding in the cross-members. Seen anything cool?
|
Re: Fuel & Brake line chassis tabs/clips
Go to Summit and put "line clamp" in the search engine. Gives lots of options. I made my own using 1/2" aluminum bar stock and a drill press. Look like Billet Specialties but instead of tapping the aluminum, drilled through and used 10-24 nutserts in the frame so the clamp attached to the frame. A little time consuming but using different size drill bits, I could run any size and number of lines I wanted. Using the belt sander for contour, they didn't even look too bad.
|
Re: Fuel & Brake line chassis tabs/clips
https://www.aa-mfg.com/ has pretty much any tab, gusset or bracket you may need.
|
Re: Fuel & Brake line chassis tabs/clips
Thanks guys.
Found these on summit (speedbump credit). They Look interesting. http://www.notchead.com/line-clamps.html |
Re: Fuel & Brake line chassis tabs/clips
1 Attachment(s)
You can see what I used in this pic.A little time consuming but turned out O.K.
I think mine are Kugel. A link to similar ones at speedway. http://www.speedwaymotors.com/Stainl...FUhufgod7MgMBw Kim |
Re: Fuel & Brake line chassis tabs/clips
"P" clamps + rivnuts
|
All times are GMT -4. The time now is 08:26 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com