1963 C10 Paint????
 

It's my very first restore and the truck has 41,000 original miles. The truck belonged to my wife's grandmother who bought it new in Mabank, Texas. I'm doing everything I can to restore it back to it's original condition. The cab and chassis is at the body shop and they are just about ready to paint. Now to my question.

The original paint color was desert beige but when I went to the auto paint store there is not a mixing code in today's paint to match. He even called a couple of paint manufacturers and they both said the same thing. Has anybody found a paint color that comes close to matching desert beige in today's modern paints????? Thanks in advance for any help you might give me....

Re: 1963 C10 Paint????
 

I'm not sure if having several different manufacturers paint codes for the same color will help in cross-referencing a current mix or not, but take a look here.
http://paintref.com/cgi-bin/colorcod...0Beige&rows=50

Re: 1963 C10 Paint????
 

Might want to try a different paint store. My local auto paint supplier (a PPG dealer) has the charts and codes for cars and trucks going back to the 30's. He had no trouble matching my interior and exterior colors on my 60 C10.

Re: 1963 C10 Paint????
 

DuPont was the original supplier to GM for these trucks. When I had my truck painted I called them and asked for customer service. They have all the codes and readily suppied the paint shop with the mix recipe.

https://lh3.googleusercontent.com/Ry...g=w306-h421-no

https://lh3.googleusercontent.com/mr...w=w442-h607-no

https://lh3.googleusercontent.com/dP...w=w470-h607-no

Re: 1963 C10 Paint????
 

Sent DuPont off an inquiry as to the formulas or to whom we could direct a supplier to contact. We'll see if they get back in touch.

Re: 1963 C10 Paint????
 

Just got their response, that was quick..

Thank you for writing. On February 1, 2013, DuPont sold the Performance Coatings division to Axalta. Products include refinish, Standox, Spies Hecker, Nason, Imron just to name a few.

For information, please contact Axalta:

Axalta Coating Systems (formerly DuPont Performance Coatings)
Eagleview Corporate Center
500 Eagleview Blvd
Exton, PA 19341

Phone: 1-855-629-2582

We hope this information will be helpful to you.

Regards,

DuPont Corporate Contact
Wilmington, Delaware USA
800-441-7515
302-774-1000

Re: 1963 C10 Paint????
 

Sent a message to Axalta USA. we'll see what they say.

Re: 1963 C10 Paint????
 

the old Ditzler # is 22141

Re: 1963 C10 Paint????
 

Well still no luck in finding the mixing codes for the 1963 C10 "Desert Beige". So today I got a couple of paint chip books from the body shop to see what I could find close to desert beige. I think I'm going to with 1991 General Motors Alabaster 56/9610 B9120..... Thanks for everyones help and if find something different please let me know. Wednesday I'm going with the Alabaster....

Re: 1963 C10 Paint????
 

Is your tk paint code 528? the # i gave you was wrong? the new one is Ditzler/Ppg is 22143 the cross to DuPont is 4323/4323L/ or 93-77785
Martin Senour # 488
Sherwin Williams # is 1744

don't know if this will help at all. also be careful with looking at paint chips as sometimes to color comes out different.

Re: 1963 C10 Paint????
 

I run up to the body shop and write the paint code down of plate. I'll post it here in a bit.... Thanks for the help....

Re: 1963 C10 Paint????
 

61K10.... You are right the paint code off the truck is 528a or 558L. Thanks for the cross reference numbers. The body shop wants to use dupont paint say I'm going to take your cross reference numbers to the paint store with me tomorrow and see what they can do..... Many Thanks.....

Re: 1963 C10 Paint????
 

you didn't say what process you are going with bc/cc (base coat/clear coat) or single stage (no clear). TCP Global in southern ca can mix this i believe in both. I used single stage from them mixed in urethane.

Re: 1963 C10 Paint????
 

Going to with a base coat then the clear coat. Hopefully the cross reference number you sent me for DuPont will do the trick.

Re: 1963 C10 Paint????
 

I used a new Nissan color but don't have the name or code handy

Re: 1963 C10 Paint????
 

If you happen to find it let me know.

Re: 1963 C10 Paint????
 

With all the help everyrone sent me we still could never get the mixing codes for the Desert Beige paint for today's modern paint. I was able to get pretty close with another color. Just wanted to say thank you to everyone for all your help and effort.....

Re: 1963 C10 Paint????
 

you must be using some real special paint! Your paint shop is just like going to an auto parts place now-days. Pretty sad.