The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   1969 - 1972 Blazers and Jimmys Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=211)
-   -   Project Sloppy Jo..... (https://67-72chevytrucks.com/vboard/showthread.php?t=707378)

71meangreenc10 05-17-2016 11:48 PM

Project Sloppy Jo.....
 
4 Attachment(s)
Why Sloppy Jo,
Cause it is a hot mess.......

My 72 Blazer has seen better days, but I am going to tear it down, fix all these high speed patches and make it a 4.8/4L60E/NP205......

Lots of sloppy work, hence the name.....

I will do it all myself to include painting.

Smitty

71meangreenc10 05-17-2016 11:54 PM

Re: Project Sloppy Jo.....
 
3 Attachment(s)
Look,
Rust.......

71meangreenc10 05-17-2016 11:55 PM

Re: Project Sloppy Jo.....
 
I'll start cutting it out this week and getting the correct patch panels ordered.....


Smitty

71meangreenc10 05-18-2016 12:00 AM

Re: Project Sloppy Jo.....
 
1 Attachment(s)
This shroud has seen better days.......

Smitty

lks dcvn 05-18-2016 08:34 AM

Re: Project Sloppy Jo.....
 
Congrats on the new project!

Keep us posted with pictures and progress.

hemi43 05-18-2016 09:19 AM

Re: Project Sloppy Jo.....
 
Good luck on the project ! Just wondering why you'll be using a 4.8 and not a 5.3? I assume you already have a donor truck?

71meangreenc10 05-18-2016 12:09 PM

Re: Project Sloppy Jo.....
 
Quote:

Originally Posted by hemi43 (Post 7597050)
Good luck on the project ! Just wondering why you'll be using a 4.8 and not a 5.3? I assume you already have a donor truck?

I don't have the luxury of junk yards that are close to me. I scrub the list for LS package vehicles, looking at cost and efficiency and the 4.8 is a good little engine.

Thoughts?

Smitty

Tomo 05-18-2016 01:13 PM

Re: Project Sloppy Jo.....
 
Quote:

Originally Posted by 71meangreenc10 (Post 7597201)
I don't have the luxury of junk yards that are close to me. I scrub the list for LS package vehicles, looking at cost and efficiency and the 4.8 is a good little engine.

Thoughts?

Smitty

Here's a great read on 4.8 vs 5.3
http://www.superchevy.com/how-to/eng...e-ls-slugfest/

71meangreenc10 05-18-2016 01:45 PM

Re: Project Sloppy Jo.....
 
Quote:

Originally Posted by Tomo (Post 7597281)

Thanks Tomo,

I have read that article. I am not looking for big HP numbers, just a reliable engine that is efficient. Have you had bad experience with the 4.8?

Smitty

Tomo 05-18-2016 02:04 PM

Re: Project Sloppy Jo.....
 
Quote:

Originally Posted by 71meangreenc10 (Post 7597305)
Thanks Tomo,

I have read that article. I am not looking for big HP numbers, just a reliable engine that is efficient. Have you had bad experience with the 4.8?

Smitty

I actually have no experience with the 4.8. I have had 2 silverados with the 5.3 and love the engine. The way I understand the article they are both great and the 4.8 only makes a little less power - sounds like it will work great in your blazer. I am considering an LS swap in my new project and may be more open to the little guy now!

71meangreenc10 05-18-2016 02:24 PM

Re: Project Sloppy Jo.....
 
Quote:

Originally Posted by Tomo (Post 7597326)
I actually have no experience with the 4.8. I have had 2 silverados with the 5.3 and love the engine. The way I understand the article they are both great and the 4.8 only makes a little less power - sounds like it will work great in your blazer. I am considering an LS swap in my new project and may be more open to the little guy now!

Good deal.

I am doing the body work now, will get into the drivetrain soon.

Smitty

hemi43 05-18-2016 05:57 PM

Re: Project Sloppy Jo.....
 
Quote:

Originally Posted by 71meangreenc10 (Post 7597201)
I don't have the luxury of junk yards that are close to me. I scrub the list for LS package vehicles, looking at cost and efficiency and the 4.8 is a good little engine.

Thoughts?

Smitty

I got lucky on my build and found a complete 03 Sierra with a 5.3 for $500.
The best advice I can give you if you're doing a swap, is buy a complete running vehicle. You'll be shocked at how many small parts you'll need/use off of the donor vehicle. Buying just the engine, trans and computer from a wrecker IMHO is not the way to go.

71meangreenc10 05-18-2016 09:57 PM

Re: Project Sloppy Jo.....
 
Thanks Hemi,

I dont have that luxury here in the Vista. I have to drive all over the place to find what I need. I am looking though....

Smitty



Quote:

Originally Posted by hemi43 (Post 7597596)
I got lucky on my build and found a complete 03 Sierra with a 5.3 for $500.
The best advice I can give you if you're doing a swap, is buy a complete running vehicle. You'll be shocked at how many small parts you'll need/use off of the donor vehicle. Buying just the engine, trans and computer from a wrecker IMHO is not the way to go.


71meangreenc10 05-18-2016 10:27 PM

Re: Project Sloppy Jo.....
 
5 Attachment(s)
These may qualify for expedient patches of the year. Must have been on one of those flip it fast shows......Sad.....

Smitty

71meangreenc10 05-18-2016 10:28 PM

Re: Project Sloppy Jo.....
 
4 Attachment(s)
More "how not to repair floors" madness.....Found this on one frame horn.....The other one looks ok so far.....

Smitty

71meangreenc10 05-21-2016 11:21 PM

Re: Project Sloppy Jo.....
 
2 Attachment(s)
It was a good parts day for SJ, picked up all the transfer parts off a 90 Burb and got a set of near new camaro manifolds with cats.......

Good day indeed.......

Smitty

First c10 05-25-2016 04:46 PM

Re: Project Sloppy Jo.....
 
Hey Smitty,
Nice project. The hulk build in my signature. I am running the 4.8/4L60E with a NP241. since it is in a 4x4 I put a nice little Comp cam in it and changed the valve springs other than that its all stock.

I am on board with your build....
Good luck!
Scott

Tomo 05-25-2016 05:18 PM

Re: Project Sloppy Jo.....
 
Im interested in seeing how the 4l60 and 241 go together - from what I have read so far some go together with no adapter and some require an adapter (I believe from a 700r4).

First c10 05-25-2016 05:23 PM

Re: Project Sloppy Jo.....
 
2 Attachment(s)
goes together great!!!:metal:

Tomo 05-25-2016 05:47 PM

Re: Project Sloppy Jo.....
 
Quote:

Originally Posted by First c10 (Post 7605049)
goes together great!!!:metal:

Good to know - what year trans and transfer case do you have?

First c10 05-25-2016 06:55 PM

Re: Project Sloppy Jo.....
 
motor/trans out of a 2008 truck and np241 transfer case out of a 1991 burb.

71meangreenc10 05-27-2016 06:24 PM

Re: Project Sloppy Jo.....
 
3 Attachment(s)
Good parts day for SJ. Picked up a Ram seat for the front and mutt seat for the back, luckily it fits. Picked up some parts of a wrecked 06 4.8, wanted to get the airbox, but it was a victim of the crash :( .....Oh well, still was a good day.

Smitty

preciador6 05-27-2016 07:16 PM

Re: Project Sloppy Jo.....
 
nice project..subscribed:metal:

preciador6 05-27-2016 07:20 PM

Re: Project Sloppy Jo.....
 
Got a parts list of what ill need before i junk the donor blazer? hemi43

71meangreenc10 05-27-2016 07:57 PM

Re: Project Sloppy Jo.....
 
Quote:

Originally Posted by preciador6 (Post 7607273)
Got a parts list of what ill need before i junk the donor blazer? hemi43

???????


Smitty


All times are GMT -4. The time now is 09:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com