The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)
-   -   do i undercoat my cab or just paint it? (https://67-72chevytrucks.com/vboard/showthread.php?t=428223)

isaacf 10-28-2010 12:41 AM

do i undercoat my cab or just paint it?
 
do i undercoat my cab or just paint it? i was planning to put a real thin coat of undercoating and then paint it balack. or i might just paint hugger orange to match the truck. i dont want it to look like i am hiding anything cause it is an almost rust free cab with factory rockers and floor boards

http://i37.photobucket.com/albums/e5...d/DSCI2294.jpg
http://i37.photobucket.com/albums/e5...d/DSCI2297.jpg
http://i37.photobucket.com/albums/e5...d/DSCI2304.jpg
http://i37.photobucket.com/albums/e5...d/DSCI2305.jpg

greguw 10-28-2010 06:49 AM

Re: do i undercoat my cab or just paint it?
 
I went with Por 15 on the bottom my build . I'm on the Eastcoast but brought my build back from California , its really tough to find rust free trucks around here .
I don't think I would use under coat , I have seen guys use the spray in bed liner like xline ... rhino liner is crap IMO .
Looks great buddy !

special-K 10-28-2010 09:26 AM

Re: do i undercoat my cab or just paint it?
 
I just stripped one of my rustfree cabs to bare metal last month.I used two coats of Rustoleum Rust Stop primer and two coats of satin black Rustoleum.I'm not sure what color the truck will be and don't care if it matches since you never see it.I guess spray-on liner is good,but it scares me like undercoat and powder coat.If and when anything gets behind it,there it stays and eats.Paint crumbs off as the chip/scratch grows.Those other coatings are like a shell and I've seen worse damage because of those than without.

82swampthing 10-28-2010 09:43 AM

Re: do i undercoat my cab or just paint it?
 
under coat because paint is not that strong up against rocks and sand and mud.trucks from the factory are under coated for a reason

OLDCHEV4X4 10-28-2010 10:37 AM

Re: do i undercoat my cab or just paint it?
 
I have done it both ways. If its a driver> undercoat. If its a show truck> paint. (And dont hit any rocks or gravel).

special-K 10-28-2010 11:10 AM

Re: do i undercoat my cab or just paint it?
 
The one I just did is for a 2wd street driver.it'll see miles but an easy life compared to a stone tossin' 4wd.I still may hit it with the Duplicolor spray on liner.

isaacf 10-28-2010 11:59 AM

Re: do i undercoat my cab or just paint it?
 
ok thanks this truck will be my tow rig and to play in the mud truck

isaacf 10-28-2010 07:09 PM

Re: do i undercoat my cab or just paint it?
 
ok i just undercoated my cab and painted the bottom

http://i37.photobucket.com/albums/e5...d/DSCI2307.jpg

msgross 10-30-2010 08:46 AM

Re: do i undercoat my cab or just paint it?
 
They have tintable undercoating as well...lizard skin I think?. I plan on epoxy primer and Raptor bed liner.

andrewbarber 09-08-2012 06:34 PM

Re: do i undercoat my cab or just paint it?
 
I have the same issue right now. I was thinking about getting my buddy to spray Rhino on it because the primer he uses in unreal and I have had him spray stuff and cant find a way to get it off. The only other issue is that it will not match my frame. The local Car quest here told me to use farm implement paint which is just single stage no hardner. He said it is the same thing as chasis black.

69GWC 09-08-2012 09:53 PM

Re: do i undercoat my cab or just paint it?
 
I would never undercoat anything again, my Nova is done and I had a tranny case get blown open and that tranny fliud turned the undercoating to tar or something along those lines.
I would use bedliner or the POR 15 .
Maybe with paint on it then it might not be effected by fluids but without it sure will.
Posted via Mobile Device

andrewmp6 09-09-2012 01:44 AM

Re: do i undercoat my cab or just paint it?
 
69gwc i think that happened because most factory style undercoating is rubberized.Its better then nothing but i like more of the modern kind or spray on bed liner.

bhpainter 09-10-2016 11:43 PM

Re: do i undercoat my cab or just paint it?
 
hows everybody\

bhpainter 09-10-2016 11:48 PM

Re: do i undercoat my cab or just paint it?
 
working on my 1967 all thats left is blast the cab everthing else done and prime takes time and money money money

li
eft

69chevytrucker 09-11-2016 12:38 AM

Re: do i undercoat my cab or just paint it?
 
i did bed liner on both sides of my floor that way nothing can hurt it

fast&low 09-11-2016 09:31 AM

Re: do i undercoat my cab or just paint it?
 
I wire wheeled it then 2 coats of primer 2 coats of paint then sprayed 3M undercoating.
Did it 2 years ago looks as good as the day I did it & it's my DD

ripper70 09-13-2016 10:42 PM

Re: do i undercoat my cab or just paint it?
 
I sand blasted it then POR 15 and rhino linered it

stevenfromtexas 07-28-2017 11:54 PM

Re: do i undercoat my cab or just paint it?
 
wire wheeled and POR15-ed

stevenfromtexas 07-29-2017 12:18 PM

Re: do i undercoat my cab or just paint it?
 
4 Attachment(s)
...probably rotated....sorry


All times are GMT -4. The time now is 08:21 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com