Power Steering Fittings
3 Attachment(s)
In the process of hooking up AC, fuel injection and PS systems on my ‘70 C10. The March drive setup on my Gen1 SBC has a type 2 power steering pump. I’m using Russell Poweflex hose and fittings. But I’m pretty sure I have the wrong 6an adapter for the high pressure pump output. It’s the correct 16mm X 1.5, but doesn’t seem to seat correctly. No one locally has been much help, so I figured I would reach out to the forum. Apologies if there’s a thread that already covers this
Posted via Mobile Device |
Re: Power Steering Fittings
Looks correct to me
|
Re: Power Steering Fittings
Couple of things.
Is the Russell hose rated or the pressure side of a power steering pump? Could it be the pump needs a fitting designed a for flare type fitting? |
Re: Power Steering Fittings
1 Attachment(s)
Appreciate the response. The hose and ends are for high pressure power steering applications. And the type 2 pump doesn’t have inverted flare, but the steering box does. I have the correct 6an adapters for the box. Waiting to hear back from TuffStuff, as they have this adapter available.
|
Re: Power Steering Fittings
The TuffStuff fitting is the answer :metal:
|
Re: Power Steering Fittings
get this too. you can lower the pressure of your pump to your liking
https://www.borgeson.com/Pumps-Brack...cing-Shim-Kit/ |
Re: Power Steering Fittings
Thanks for that info, NJ68!
|
All times are GMT -4. The time now is 06:25 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com