Re: RideTech's New C10 CoilOver Kits
 

what is your eye to eye measurement on your coilovers at ride height? Also, what size of wheel and tire do you have mounted on the truck?

Re: RideTech's New C10 CoilOver Kits
 

I adjusted the coil over yesterday and it gave me a little more clearance. I have about 2" now. I'll take a measurement from eye to eye. What should it be? The tire size is a 205/70-15

Re: RideTech's New C10 CoilOver Kits
 

Can more of you guys running this kit please post photos of your trucks?

Re: RideTech's New C10 CoilOver Kits
 

Here's the latest pic of my truck.

Re: RideTech's New C10 CoilOver Kits
 

The Stance is perfect!!

Re: RideTech's New C10 CoilOver Kits
 

Looks great!

Re: RideTech's New C10 CoilOver Kits
 

thank you. The truck looks great. What is your experience with the kit how does it ride and how do you like it? Any issues with ground clearance and the front end?

Re: RideTech's New C10 CoilOver Kits
 

Rides and handles very well. I haven't even put on my front sway bar
Yet and it corners great. Ground clearance by the control arms is a little low but with and lowered vehicle you have to be careful. No regrets buying this kit at all.

Re: RideTech's New C10 CoilOver Kits
 

thank you. The truck looks great. What is your experience with the kit how does it ride and how do you like it? Any issues with ground clearance and the front end?

Re: RideTech's New C10 CoilOver Kits
 

Here is mine, haven't drove it yet but it's about done

Re: RideTech's New C10 CoilOver Kits
 

Aod92 is that the lowest the back will go without some type of bed modification?

Re: RideTech's New C10 CoilOver Kits
 

Here is mine, haven't drove it yet but it's about done

Re: RideTech's New C10 CoilOver Kits
 

It could go a little lower but not much.

Re: RideTech's New C10 CoilOver Kits
 

Truck Looks great!

Re: RideTech's New C10 CoilOver Kits
 

keep us posted!

Re: RideTech's New C10 CoilOver Kits
 

.
.

Sharp looking truck!

.
.

Re: RideTech's New C10 CoilOver Kits
 

When you order the kit do you tell Ridetech which motor and trans combo you are running to get the correct rated springs for the coilovers?

Re: RideTech's New C10 CoilOver Kits
 

I would give ridetech a call in the morning and ask. I believe most kits go out with the same coil springs for our trucks.

Re: RideTech's New C10 CoilOver Kits
 

When you order a coilover kit we ask what the motor and trans combo is. If we don't be sure to tell us. The LS and Small block springs are the same, but the big block trucks require a stiffer spring.

Re: RideTech's New C10 CoilOver Kits
 

Also let us know if you have any additional weight such as superchargers, turbos etc. because they can also vary the spring rate.

Re: RideTech's New C10 CoilOver Kits
 

2nd trip out with the truck and less than 20 street miles. Brought home a win in the Columbus Goodguys truck class. It's amazing how well it does for a stock crossmember.

Re: RideTech's New C10 CoilOver Kits
 

Congrats man that's awesome!

Re: RideTech's New C10 CoilOver Kits
 

I thought i recgonized this truck! Seen its pics on goodguy show last weekend. I love the trucks in autocross! Yours and James trucks make me jealous. Congrats man!

Re: RideTech's New C10 CoilOver Kits
 

Anyone snaked a dual exhaust through the rear coil over set up ?

Re: RideTech's New C10 CoilOver Kits
 

I'm a little late to this thread, but I also purchased this kit. So far this install has gone okay. A couple things I learned though.

-Paper templates are next to worthless. It was much easier to cut off the high section of the front crossmember. Sit the new bracket down and then trace out what actually has to be cut out. The one for the rear was, ummm... off... I bet I ground down another 1/4-1/2 inches in spots to have a nice tight flush fit.

This is the final cuts before the frame went off to powder coat. I should start reassembling it next week.

http://i.imgur.com/Spbn8PRl.jpg http://i.imgur.com/X7Rlz36l.jpg