The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Racing and high performance (trucks haulin more than hay) (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=60)
-   -   Spicing it up for Regan... (https://67-72chevytrucks.com/vboard/showthread.php?t=788567)

Super73 06-13-2019 11:28 PM

Spicing it up for Regan...
 
2 Attachment(s)
Got a new intake manifold 😁

71Dragtruck 06-14-2019 12:32 AM

Re: Spicing it up for Regan...
 
I hear those front mount units make it hard to set the fuel bowl level.

regan wilson 06-14-2019 07:05 AM

Re: Spicing it up for Regan...
 
Woo Hoo! That's cool. Now hurry up and put it on.

Super73 06-14-2019 12:18 PM

Re: Spicing it up for Regan...
 
I get the shortblock back in pieces from the machine shop next week.

Hopefully build this motor with in the next 2 weeks.

Then I need to build the Alston round tube front end.

Then raise the rear 4-link frame brackets.

Wire the new Holley Dominator

Fab a ice box, plum the water pump and lines


Lots to do

Super73 06-20-2019 02:12 AM

Re: Spicing it up for Regan...
 
3 Attachment(s)
Should look good and run just as good ..

regan wilson 06-20-2019 06:08 AM

Re: Spicing it up for Regan...
 
Looking good. No turbo lag and no bottle to fill.

71Dragtruck 06-20-2019 10:42 AM

Re: Spicing it up for Regan...
 
Nice stuff!

Super73 08-11-2019 11:00 PM

Re: Spicing it up for Regan...
 
3 Attachment(s)
Few update pics

regan wilson 08-12-2019 07:32 AM

Re: Spicing it up for Regan...
 
That looks very nice. Now do something with it! LOL
Are you going to Dyno the motor or tune on a chassis Dyno?

Super73 08-12-2019 07:11 PM

Re: Spicing it up for Regan...
 
Thinking engine Dyno both NA an with blower then chassis Dyno.

Super73 04-17-2020 02:02 AM

Re: Spicing it up for Regan...
 
5 Attachment(s)
Here you go Regan ��
25.2 update

regan wilson 04-17-2020 07:40 AM

Re: Spicing it up for Regan...
 
Man that is nice. That is going to be light.

Super73 04-17-2020 10:52 PM

Re: Spicing it up for Regan...
 
It was previously 3,120 with the old combo and me in it. That was a CM back half with the mustang 2 and wilwood brake setup.


I am hoping it comes in at <2,900 with these changes. Keep in mind, the blower and intercooler / tank will poor some back in and I am keeping the bottle too.

regan wilson 04-18-2020 08:04 AM

Re: Spicing it up for Regan...
 
Are you adding a F/C cage?

Super73 04-18-2020 11:33 PM

Re: Spicing it up for Regan...
 
2 Attachment(s)
That was done today 😁

regan wilson 04-19-2020 08:15 AM

Re: Spicing it up for Regan...
 
Looks good. Nice work for sure.

aggie91 04-23-2020 12:03 PM

Re: Spicing it up for Regan...
 
That looks good. Looks like a PITA to get in with that '63 Cab a pillar...

regan wilson 04-24-2020 10:05 AM

Re: Spicing it up for Regan...
 
I think I would get stuck trying to get in.lol. That's one reason i don't want a F/C cage. Are you going to tin the bed floor while your at it?

tinydb84 04-27-2020 06:40 PM

Re: Spicing it up for Regan...
 
Man. I think I would be getting in from the passenger side at that point.

regan wilson 05-02-2020 08:12 PM

Re: Spicing it up for Regan...
 
With your Moderator status I think you need to change the name of this thread. Something like " Super 73's Badass Rebuild" Or ?

Super73 05-04-2020 01:19 AM

Re: Spicing it up for Regan...
 
They should actually start a dedicated thread

PhilaTruck 07-26-2020 02:12 PM

Re: Spicing it up for Regan...
 
Looks great, gonna be badass for sure. Cage looks great

jjzepplin 07-26-2020 02:39 PM

Re: Spicing it up for Regan...
 
Wow! In For some big numbers and build specs!


All times are GMT -4. The time now is 11:26 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com