Re: Dad's 1979 GMC Heavy Half Transformation
As Mike stated, the fenders, doors, hood, and front valance, are new old stock gm parts, so they fit perfectly! :metal:
|
Re: Dad's 1979 GMC Heavy Half Transformation
1 Attachment(s)
Finished cleaning up the rest of the little stuff I found on the cab, resealed all the seams, and since I had a bunch of work on the roof, and a a few spots I sanded through, I just shot another full coat of epoxy, when it flashes off I'll hit it with some surfacer.
|
Re: Dad's 1979 GMC Heavy Half Transformation
4 Attachment(s)
Shot a couple coats of 2k primer, and a little blue on the inside of the cab. Looks good, I really like the color! It's a little early in the project to be spraying color, but it's a good boost to the motivation! :metal:
|
Re: Dad's 1979 GMC Heavy Half Transformation
That looks great Jayson!!! I need to catch up!
|
Re: Dad's 1979 GMC Heavy Half Transformation
Quote:
|
Re: Dad's 1979 GMC Heavy Half Transformation
Lookin' good in the hood!
|
Re: Dad's 1979 GMC Heavy Half Transformation
Love that blue!
|
Re: Dad's 1979 GMC Heavy Half Transformation
Quote:
Jayson and I have a surprise to announce here in a day or two. Hint, we're mixing up my two builds!!!!!!! ???????? Mike |
Re: Dad's 1979 GMC Heavy Half Transformation
3 Attachment(s)
I finished sanding the cab last night, and couldn't help but shooting some paint on it. Should have some clear on it in another couple hours.:metal:
|
Re: Dad's 1979 GMC Heavy Half Transformation
4 Attachment(s)
Clear is on! I'm trying out SPI universal clear coat on this truck, and so far it is awesome! I got a few specks of dirt in it, but it will sand and buff beautifully. :5150:
|
Re: Dad's 1979 GMC Heavy Half Transformation
1 Attachment(s)
Did I mention that I love my new paint gun!:lol:
|
Re: Dad's 1979 GMC Heavy Half Transformation
That looks amazing. Love the subtle two-tone.
|
Re: Dad's 1979 GMC Heavy Half Transformation
4 Attachment(s)
Jayson is doing some smoke'n hot work on my Dad's 79 GMC. CHANGE TO THE PLAN: The other night while I was traveling to Fargo, ND from Des Moines, IA late at night Jayson and I were talking about this project and my 78' build (Addiction). During the conversation, it was decided to take all the original parts (350/350, rear end with drum brakes) and put Dad's 79 GMC back to stock, except of course for the drop and that it's about 14/6" inches shorter. Will maintain the rally wheels, 8's in the back and 7's up front with white walls all the way around (Jayson didn't know that part, he's asleep right now). Matter of fact, I just ordered the tires last night. So, I've temporarily put a halt on the 78 while I work on gathering all the parts that are needed to put this 79 back to "ALMOST" all stock.
This also means that all the LS/4L603, fuel system, cooling system, disc brakes in the rear etc will go into the 78 after we make the swap in a few weeks. I can't say enough about what great work Jayson has done and what a joy he is to work with!!! I love my blast cabinet, it sure comes in handy!!!!! Thanks Mike Here you go, what I've been doing the last couple days in support of the main effort, Dads79GMC: |
Re: Dad's 1979 GMC Heavy Half Transformation
Truck is coming along nicely! What are your plans for re-wiring it? hint...hint lol
|
Re: Dad's 1979 GMC Heavy Half Transformation
Are you offering to sponsor it and give me the wiring? Hahaha!
|
Re: Dad's 1979 GMC Heavy Half Transformation
If you happen to have a 6.2 LS and 4L80E that you’d like to give me as a sponsor for my ‘80 Monte project we can talk! lol
|
Re: Dad's 1979 GMC Heavy Half Transformation
Nope!
|
Re: Dad's 1979 GMC Heavy Half Transformation
5 Attachment(s)
Gonna close out the day! Was able to blast and prime brackets for the 350 since it's kind of an emergency now to get that and the trans done and transported to MN along with the rear end. I will call the rear end a wrap!! Can't forget fluids though!! Also put in new seals all around the rear housing.
Mike |
Re: Dad's 1979 GMC Heavy Half Transformation
What are you using to blast all the little parts?
|
Re: Dad's 1979 GMC Heavy Half Transformation
1 Attachment(s)
Aluminum Oxide on these pieces. Have also used this stuff as well. I purchased both at Tractor Supply Company. Mike
|
Re: Dad's 1979 GMC Heavy Half Transformation
Are you using that in a cabinet or have something else? I wouldn't mind finding something inexpensive to do some clean up of some parts. Seems like I'm always spending forever cleaning up stuff with a white wheel and grinder.
|
Re: Dad's 1979 GMC Heavy Half Transformation
I have a cabinet, Love it!
|
Re: Dad's 1979 GMC Heavy Half Transformation
Quote:
|
Re: Dad's 1979 GMC Heavy Half Transformation
Excellent choice for paint! Looks great!
|
Re: Dad's 1979 GMC Heavy Half Transformation
Quote:
|
All times are GMT -4. The time now is 01:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com