Intro and Some Photos of my '63 Project
 

Hello. I thought I would introduce myself and post some photos of my project and that might be of some interest to other 60-66 owners.

I lowered the top lips of the front fenders 2.5 inches to better match the rear fender stretch.
http://i268.photobucket.com/albums/j...n_after1-1.jpg

Here is the rear fender with a 3.5 inch stretch to accommodate the 31-inch tall tires.
http://i268.photobucket.com/albums/j...ellstretch.jpg

To fit the 18 inch wide rear tires, I stretched the wheel wells, too.
http://i268.photobucket.com/albums/j...eltubs_a-1.jpg
http://i268.photobucket.com/albums/j...s_both_a-1.jpg

Re: Intro and Some Photos of my '63 Project
 

Welcome Vince!! Nice Truck!!

Re: Intro and Some Photos of my '63 Project
 

Interesting mod on the front fender. I've thought about doing the opposite; raising the rears to better match the front. Can't wait to see how it looks.

Re: Intro and Some Photos of my '63 Project
 

:welcome2: to the board from Mid-MO!!!

Great looking project!

Re: Intro and Some Photos of my '63 Project
 

:welcome2: From Ohio:chevy:

Re: Intro and Some Photos of my '63 Project
 

Congrats on welding that reproduction front fender, i put one on my truck last week and it is some light guage metal.

Re: Intro and Some Photos of my '63 Project
 

Looking good! Could we get some better pics of the front wheel opening mod? That to me is the only issue these trucks have is the fact that you cant 'tuck' smaller rims and tires under the fender like you can with the 67-72's.

Re: Intro and Some Photos of my '63 Project
 

lookin good

Re: Intro and Some Photos of my '63 Project
 

Interesting. I'm anxious to see how it turns out. 18 inches wide, those sound like some good meats. What motor to turn em?

Re: Intro and Some Photos of my '63 Project
 

welcome to the board from Idaho! I like your mods, but need bigger pictures

Re: Intro and Some Photos of my '63 Project
 

Thanks, everyone! I never knew about this forum until 62 short step clued me in...much props to him. I had just been kind of plugging away on things on my own. I wish I had known about this site earlier, it would have made things a lot easier in working on this project. :rolleyes:

Here is a little larger image of my front fender modification. The weld line is about where the original lip was located, which is what necessitated the 2.5-inch spacer in the middle.
http://i268.photobucket.com/albums/j...rLipDrop2a.jpg

Re: Intro and Some Photos of my '63 Project
 

Sweet man! That's the kind of stuff I like to see. I bet hardly anyone will notice when it's done.

You know, you can also tub the front end for more tuckage.

Re: Intro and Some Photos of my '63 Project
 

Yeah, I did that on a friend's '66 where I used a section of a motorcycle fender to create a hump just in front of the hood hinge - he had Z'd his front frame so the tires extended above the inner fender (totally impractical, but it looked cool). He was just going to cut out most of the inner fender, but we were able to keep most of the inner fender. I'm hoping I don't end up putting my truck down that low. ;)

Re: Intro and Some Photos of my '63 Project
 

LOOKS COOL ,I LIKE THE FACT IT LOOKS LIKE ITS STOCK ALSO, NICE WORK AND WELCOME:metal:

Re: Intro and Some Photos of my '63 Project
 

Cool lookin ride......hope to see some more pics.

Congrats to Dinos63.......I think you didnt have any typos!:lol:

Re: Intro and Some Photos of my '63 Project
 

Here is a photo of the rolling chassis (before I dropped the front fender lips), and of the Pontiac 455 mock up. The previous owner apparently got happy with his drill and Swiss-cheesed the fire wall, so I've been welding up all of the holes - what a PITA!

http://i268.photobucket.com/albums/j...de_Height2.jpg

http://i268.photobucket.com/albums/j...mockup4a-1.jpg

Re: Intro and Some Photos of my '63 Project
 

We need wide shots after the fender mod!

Re: Intro and Some Photos of my '63 Project
 

WElcome to the board from North Idaho. What are the specs on that Pontiac? Ought to be one sweet truck when it's done. Keep the pics coming.....I love them '63's

Re: Intro and Some Photos of my '63 Project
 

Truer words were never spoken.

Re: Intro and Some Photos of my '63 Project
 

Welcome from Kansas City, KS. I like the fab work...very nice and clean.

Re: Intro and Some Photos of my '63 Project
 

Howdy from BC. Nice metal work.

Re: Intro and Some Photos of my '63 Project
 

Nice, great work

Re: Intro and Some Photos of my '63 Project
 

Hows it going vin?

Re: Intro and Some Photos of my '63 Project
 

Re: Intro and Some Photos of my '63 Project
 

I'm not moving from this chair till I see pics! ;)

:p