turbo 350 tailshaft seal ?
2 Attachment(s)
I had to replace the tail shaft bushing on my 78 turbo 350 and got all my parts before hand but I,m wondering if they gave me the wrong seal,it does slide over the yoke . The one I took out looks like pic #1 and the one they gave looks like pic #2 . Lots on new young parts guys lately ,not there fault just no training. All the old guys are retiring. A little RTV silicone around the edge if I remember right .
|
Re: turbo 350 tailshaft seal ?
SKF 15041 part # on the second pic which they sold me thanks
|
Re: turbo 350 tailshaft seal ?
The part number I find for the correct part is 9613S for both ACDelco and Timken
|
Re: turbo 350 tailshaft seal ?
I have seen them made both ways, depends on the manufacture. Either will work fine. I do prefer the style with the flange on it. You know its square when installed
|
Re: turbo 350 tailshaft seal ?
Thank you , I don,t want to do this again , all parts are cheap except tranny fluid. I just to double check
|
Re: turbo 350 tailshaft seal ?
I've used both. The one with the flange is easier to remove the next time. Not too much fluid should spill out.
|
All times are GMT -4. The time now is 01:05 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com