The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Pulled axles on a 65 12 bolt question (https://67-72chevytrucks.com/vboard/showthread.php?t=735955)

Pinchecharlie

04-20-2017 11:01 AM

Pulled axles on a 65 12 bolt question

I pulled my axles last nightvsnd when I pulled the large pin in the rear end (the one that keeps the axles in place) I noticed it was a bear to get out. I've seen guys pull them with magnets. Had to really reef on it with a screwdriver through the hole back and forth la la la. Should I be concerned? Easy visibly bent but I did not take any measurements either. Thanks Charlie

Shady Rascal

04-20-2017 11:23 AM

Re: Pulled axles on a 65 12 bolt question

If the crosspin is galled or damaged, they are cheap and easy to get.

Yukon Gear part number YSPXP-038

https://www.yukongear.com/productdet...spx?ProdID=504

Summit has them in stock for 14 bucks.

https://www.summitracing.com/parts/yga-33406

Pinchecharlie

04-20-2017 11:52 AM

Re: Pulled axles on a 65 12 bolt question

Nice thank you very much!

Shady Rascal

04-20-2017 11:53 AM

Re: Pulled axles on a 65 12 bolt question

Sure

All times are GMT -4. The time now is 04:17 PM.