Blower Motor Vent Tube Connector
 

I have a 1966 C10 with a deluxe heater and factory a/c. I just bought a replacement blower motor and I cannot find anyone who sells the rubber connector to the blower motors vent hole. It is my understanding that this connection hooks to the a/c housing to cool the blower motor. Does anyone know where to find one? Thanks!

Re: Blower Motor Vent Tube Connector
 

Don’t know what your motor looks like, but I used a Pontiac Fiero heater motor on my truck. This is what the vent tube looks like on it:

http://imageshack.us/a/img254/2381/fieromotor.jpg

I believe all Chevy S10’s use the same exact heater, so these tubes should be plentiful in the junk yard if they happen to be what your motor needs. If it’s the wrong type, perhaps some other GM car could offer what you need.

Re: Blower Motor Vent Tube Connector
 

I suspect that the Fiero tube will work on mine if the hole size is the same. I'll see if anyone has a listing for a vent tube for a Fiero. I'll also check for a S10. Thanks.

Re: Blower Motor Vent Tube Connector
 

also try 82 corvette

Re: Blower Motor Vent Tube Connector
 

I know this is an old thread, but i found A/C delco part number 15-34062 for that tube, which will help those looking to add it to their trucks. Still seems available, around $10.

Re: Blower Motor Vent Tube Connector
 

This thread was added to the Heaters category of your 60-66 FAQ Index.

NOTE : if this link changes in the future, look for the sticky at the top of the 1960-66 Message Board.


-W