The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   6L80 trans yoke to a 12 bolt rear end (https://67-72chevytrucks.com/vboard/showthread.php?t=793379)

howell57 09-13-2019 12:24 PM

6L80 trans yoke to a 12 bolt rear end
 
Just got the yoke (AC Delco $37.00) for the trans and wondering what you guys are doing about your driveshafts! Not sure they make a 1310 to 1410 ujoint.

KQQL IT 09-13-2019 01:52 PM

Re: 6L80 trans yoke to a 12 bolt rear end
 
1 Attachment(s)
Time for a new front yoke.

Redding Cv & Driveshaft
11083 Rhyolite Dr, Redding, CA 96003
(530) 243-2293
https://maps.app.goo.gl/m9DkQEqkESiNY1xQ8

https://www.dennysdriveshaft.com/c60...kes_steel.html

BlouDon 09-13-2019 04:27 PM

Re: 6L80 trans yoke to a 12 bolt rear end
 
For my education, what controller will be used to control the 6L80?

howell57 09-13-2019 04:58 PM

Re: 6L80 trans yoke to a 12 bolt rear end
 
The 2018 6L80 has its own internal controller from what I was told by the guy that did my harness. I'm an old S/B guy and this new computer engine is way above my current knowledge.

howell57 09-13-2019 05:01 PM

Re: 6L80 trans yoke to a 12 bolt rear end
 
Looking to get a one piece GM drive shaft and weld on the 1410 (Front) and 1350 steel pinion yoke for a 12 bolt.


All times are GMT -4. The time now is 03:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright 1997-2020 67-72chevytrucks.com