The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   Change of plans (https://67-72chevytrucks.com/vboard/showthread.php?t=260417)

Coronas56 09-29-2007 03:37 PM

Change of plans
 
4 Attachment(s)
Well Hopefully this is the last time I change my mind, Spent a weekend grafting a sub frame on to the chassis, with help of a few members , One in Calif. and the other in Canada, its a small world Via the net. Bought 4 link from TCI have a fo.. 9 inch with 4 11 , detroit locker . Well while i was looking for an extra chassis, found one within 13 miles from me, it was clean, in the same stall he had his 55 with Corvette suspension, Oh I liked what I saw. So I ordered Vette suspension,Front and rear, which I received yesterday , out of a 94. 13 inch brakes.. So the pictures are of the Truck with vette suspension. My current chassis and the new parts. So now to get rid of the extras.....More work for me, but Oh well thats what I want.......Plus I have the wifes blessing.

Coronas56 09-29-2007 03:43 PM

Re: Change of plans
 
4 Attachment(s)
more pictures

Coronas56 09-29-2007 03:50 PM

Re: Change of plans
 
2 Attachment(s)
Some pictures of the 55 underside the front suspension, they used the corvette engine cradle.

Coronas56 09-29-2007 04:37 PM

Re: Change of plans
 
2 Attachment(s)
all the work done to chassis.....Just to start all over

Igotachevyor2 09-30-2007 07:52 AM

Re: Change of plans
 
looks good ...good luck

56chevy1300 09-30-2007 01:28 PM

Re: Change of plans
 
what the heck coronas56 all that free advice down the drain... ;)

I'm looking forward to seeing the upgrades!

56chevy1300 09-30-2007 01:29 PM

Re: Change of plans
 
Make sure to post lots of pics of your 4 link install...I just bought the same kit

Coronas56 03-22-2008 05:03 AM

Re: Change of plans
 
4 Attachment(s)
Well Spring is here, Been a while since I've posted. so here goes. Found 2 more chassis. Short and long. Used the long and have a short for a spare, might change my mind again. (doubt it) anyways, Installed My Front Crossmember, tacked for now, Kicking up the rear rails a few to install My vette rear end . Moved My Axel centerline forward 1 1/2 inches. Here are a few Pic.......

Coronas56 03-22-2008 05:06 AM

Re: Change of plans
 
4 Attachment(s)
More photos

Coronas56 03-22-2008 05:10 AM

Re: Change of plans
 
2 Attachment(s)
Few More

Coronas56 03-22-2008 05:13 AM

Re: Change of plans
 
1 Attachment(s)
Last one, More to come.............

CAL 58 GMC 03-22-2008 08:38 PM

Re: Change of plans
 
Nice job man! When is the rear going in? make sure to post alot of pictures on the install.

Coronas56 03-22-2008 10:18 PM

Re: Change of plans
 
Thanks Cal, The Rear will go in as soon as I beef up the rear rails, and cut the old part of the chassis off, lots of work, but today again we got dumped on , 5 more inches of wet heavy snow...............

Daniel U 03-23-2008 07:16 PM

Re: Change of plans
 
Cool man! At least you only got the front done before you changed your mind. I'm watching a build in the 67-72 projects, and a guy named abadsvt just finished his chassis and decided to go to a tubular Corvette chassis. Looking good. Keep us posted.

solidaxel 03-25-2008 07:51 PM

Re: Change of plans
 
GOOD DECISION, on the Vette parts!!
Where did you buy your suspension parts from. how did they ship them. I am in the planning stages of a tube chassis and C-5 suspension for my 62 vette and I am still looking for a good supplier of donner parts'Thanks

Coronas56 03-26-2008 01:40 AM

Re: Change of plans
 
Solidaxel, Bought my suspension parts from Redline corvette parts out of Claremont, Cali. He shipped them on a pallet, Freight. Total for components 1200.00 ,shipping ,325.00.To Minnesota

Coronas56 03-31-2008 04:53 AM

Re: Change of plans
 
5 Attachment(s)
Ok , Back, The snow put me to a stop. , Putzin around today. Nice and 45 degrees. Put fish plates on. and cross bracing. I know you guys like pictures , so here ya go......

tiggerstoy 03-31-2008 05:57 PM

Re: Change of plans
 
wow!!!....some verry nice work on the frame so far, keep up the good work, and keep up with the pics :)

solidaxel 03-31-2008 06:21 PM

Re: Change of plans
 
Thanks for the tip on the suspension parts, I have there number.
..............What is all that white stuff on the hood of the Chevelle!!

Coronas56 04-01-2008 02:21 AM

Re: Change of plans
 
5 Attachment(s)
Welded everything solid today. Set rear end under to figure out bracketry......

Coronas56 04-05-2008 07:07 AM

Re: Change of plans
 
2 Attachment(s)
First pic was April 1st... 6 inches of snow,I have to deal with the white stuff, the second pic was today.......Hope it's done snowing.........

mylow53 04-05-2008 07:20 PM

Re: Change of plans
 
wow us californians had to suffer sub 50 degree temps on april 1st it was in the mid 40s around 6 am (65 degrees by noon). i noticed you are working with snow still on the ground and in a t-shirt. i think i would have a couple of shirts, a hat and jacket on. and the door shut....
nice project..
GT

Coronas56 04-06-2008 12:10 AM

Re: Change of plans
 
Quote:

Originally Posted by mylow53 (Post 2662484)
wow us californians had to suffer sub 50 degree temps on april 1st it was in the mid 40s around 6 am (65 degrees by noon). i noticed you are working with snow still on the ground and in a t-shirt. i think i would have a couple of shirts, a hat and jacket on. and the door shut....
nice project..
GT

My Low53, sometimes in Feb when it hits 30 degrees around here, you start seeing people in shorts. But then again 30 degrees is warm , compared to 20 below..........

Coronas56 04-07-2008 07:22 AM

Re: Change of plans
 
1 Attachment(s)
Boxed in chassis and plugged holes today........Next up is making x member........

chevyrestoguy 04-08-2008 05:34 AM

Re: Change of plans
 
Nice job! You're going to love the way your truck handles and rides down the road.

Your fab skills are excellent. Keep posting, I love that stuff!


All times are GMT -4. The time now is 03:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com