The 1947 - Present Chevrolet & GMC Truck Message Board Network - Whats everyone have for front inner fender tubs, while bagged?

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - Whats everyone have for front inner fender tubs, while bagged? (https://67-72chevytrucks.com/vboard/showthread.php?t=775051)

CrazyCraig

11-12-2018 01:45 PM

Whats everyone have for front inner fender tubs, while bagged?

Was hoping to get around from going with fire wall hinges.

SCOTI

11-13-2018 10:54 AM

Re: Whats everyone have for front inner fender tubs, while bagged?

What vehicle?

Modify stock tubs.
Modified/built trailer fender tubs.
Fabricated sheet metal tubs.
Hills Rod & Customs (Pleasant Hill, CA).
Slosh Tubz.

68is4me

11-15-2018 12:01 PM

Re: Whats everyone have for front inner fender tubs, while bagged?

More info is needed what are your plans what do you have?

I am running 2.5 drop spindles, PB upper and lower arms, bagged with 17" wheels. Stock inners and hinges are working fine for me.

SCOTI

11-15-2018 12:16 PM

Re: Whats everyone have for front inner fender tubs, while bagged?

Quote:

Originally Posted by 68is4me (Post 8384869)

More info is needed what are your plans what do you have?

I am running 2.5 drop spindles, PB upper and lower arms, bagged with 17" wheels. Stock inners and hinges are working fine for me.

Most likely you also have a fairly short tire up front as well (<28").

68is4me

11-15-2018 12:39 PM

Re: Whats everyone have for front inner fender tubs, while bagged?

Yes it is a short tire 215/50r17 about 25.5 tall

bluex

11-17-2018 09:03 AM

Re: Whats everyone have for front inner fender tubs, while bagged?

1 Attachment(s)

I modified a set of wheel wells from the bed for mine. It was fairly easy but I do still need to make some small filler pieces to close in some gaps.

SCOTI

11-17-2018 04:34 PM

Re: Whats everyone have for front inner fender tubs, while bagged?

Quote:

Originally Posted by bluex (Post 8385950)

I modified a set of wheel wells from the bed for mine. It was fairly easy but I do still need to make some small filler pieces to close in some gaps.

This is what I mocked-up for my 67 years ago....

All times are GMT -4. The time now is 05:52 AM.