The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Heavy Haulers (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=239)

- - 1968 Chevy C50 Steering box (https://67-72chevytrucks.com/vboard/showthread.php?t=697333)

Deerelindel

02-08-2016 01:25 PM

1968 Chevy C50 Steering box

Hi i am building a truck and i am using the C50 box but i need a rebuilt kit or at least a place to get the seals. I have tried Napa, Fleet pride and all of the advance etc. Anyone know where to find the kit.
:flagw:

65 C20

02-08-2016 01:59 PM

Re: 1968 Chevy C50 Steering box

Did you try Rock Auto ?

I looked and they go up to C30, not sure if that would be the same.

Deerelindel

02-08-2016 02:10 PM

Re: 1968 Chevy C50 Steering box

Quote:

Originally Posted by 65 C20 (Post 7478415)

Did you try Rock Auto ?

I looked and they go up to C30, not sure if that would be the same.

The pickup boxes swing horizontaly these swing vertically. Not the same box.

rkn463

02-20-2016 11:34 PM

Re: 1968 Chevy C50 Steering box

Quote:

Originally Posted by Deerelindel (Post 7478369)

Just out of curiosity, what are you building?

-Richard

Deerelindel

02-21-2016 09:44 PM

Re: 1968 Chevy C50 Steering box

Quote:

Originally Posted by rkn463 (Post 7493603)

Just out of curiosity, what are you building?

-Richard

I out a semi motor in a 68 3/4 but i also made it 4wd

rkn463

02-23-2016 11:09 PM

Re: 1968 Chevy C50 Steering box

Quote:

Originally Posted by Deerelindel (Post 7494560)

I out a semi motor in a 68 3/4 but i also made it 4wd

Pictures?

Deerelindel

02-28-2016 10:39 PM

Re: 1968 Chevy C50 Steering box

2 Attachment(s)

here are some pictures

C10 - C90 Bill

02-29-2016 09:58 AM

Re: 1968 Chevy C50 Steering box

Looking good.

rkn463

02-29-2016 11:50 PM

Re: 1968 Chevy C50 Steering box

Quote:

Originally Posted by Deerelindel (Post 7503118)

here are some pictures

Very cool!

84rzv500r

03-01-2016 03:36 PM

Re: 1968 Chevy C50 Steering box

oh yeah... i wanted a 6v53T for my K-55 GMC project but settled for an 8v-71... regarding the seals take them to the local bearing house along with your vernier calipers and they should be good ... is your slave cylinder leaking they almost? all do

rkn463

12-17-2016 07:20 PM

Re: 1968 Chevy C50 Steering box

Quote:

Originally Posted by Deerelindel (Post 7478369)

If it is a power steering box then Auto Zone has the seal kit. Looking at the box now, looks like Duralast part # 8701

-Richard

All times are GMT -4. The time now is 09:16 AM.