can i do this?
 

can i do this without having problems
http://community.webshots.com/photo/...0122YYgkRZQhDw

o yea i have 5 inch drop coils on it now and will use them after puttin in the notch if i can
http://wsphotofews.excite.com/039/oh/F9/3G/2l58155.jpg

[This message has been edited by 68chevy (edited 01-02-2002).]

You can, but it's pointless. Look at where your rear axle tube is. It will definatly bottom out. You want the notch over the axle tube for added suspension travel.

------------------
68chevy, 95step bed, euro taillights, fastbags, fully shaved, phantom grill, 350 with a small huffer, TH350, 12bolt Auburn posi 4:11's////// 95 Chevy Tahoe (PHATHOE) all mouldings and emblems stripped, 4/4 drop, Niche Bellas 18's, billet grill, Euro taillights, clear corners, billet antena & wiper covers, leather interior, Pioneer cd, alpine amp, Rockford 15's////// 97 CBR 900 RR, everything that is aluminum was polished or powdercoated candy purple, 6 color change Chameleon paint at $300 a pint(ouch), custom one of a kind under seat exaust, hand cut decals, runs 11 flat at 126mph FUUUUUUUUUUUUUUN!!!!!!!! my toys at http://communities.msn.com/NSANE68Tr...s/shoebox.msnw

I had the same idea. Wonder if this would work:

http://randysrods.freeservers.com/images/2l58155.jpg

you could probably do it but whats the point? if you want to go that low you probably ought to be looking at air bags, if you really want a static drop use springs and a block with a notch.

------------------
68 swb fleet soon to be bagged and big block powered
68 lwb fleet in primer
35 chevy truck
97 dodge on 35 boggers
3 out of 4 aint bad!
Jefferson city, MO

Just going for a different approach. I could do all the work myself since I have the equipment and know-how, and wouldn't have to spend a dime.