The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (http://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (http://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   IN Parting Out a 1967 Chevy C20 Small Back Window, Long Bed (http://67-72chevytrucks.com/vboard/showthread.php?t=509822)

Todd68Chevy 02-18-2012 11:36 PM

Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
5 Attachment(s)
****** I have parts from this that are for sell ****** Edited 2-23-12

I parted out a 1967 Chevy C20 SBW Long bed. The frame and partial body is gone. It was a 4 speed truck but did not have an engine or transmission. I do not have the truck anymore just parts from it. The floor boards and bed were pretty rough. The trailing arms were so bad that one of them is broken.

The complete doghouse is pending sale locally.
The doors are sold complete locally.
The 4 speed steering column I am keeping for myself.

Here is some of what I see.

1: Steering wheel and horn button-- SOLD
2: Ignition spacer, used switch and lock cylinder incl. key-- SOLD
3: Glove box door w/ Spid label-- SOLD
4: Inside Mirror and arm, mirror is not clear-- $25.00 plus shipping
5: Cigarette lighter working condition unknown-- $10.00 plus shipping
6: Small block engine stands-- $20.00 plus shipping
7: High hump, 4 speed hole and the front is cut and bent up -- $20.00 plus shipping

Let me know what you see.

Post to the thread as per rules. Thanks for looking

Todd68Chevy 02-18-2012 11:39 PM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
5 Attachment(s)
More pictures

Todd68Chevy 02-18-2012 11:43 PM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
5 Attachment(s)
pictures.

too much stuff 02-19-2012 12:10 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
Let me know on the steering box condition and price... Last e-mail didn't come through.
Eric

Todd68Chevy 02-19-2012 12:13 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
Quote:

Originally Posted by too much stuff (Post 5197514)
Let me know on the steering box condition and price... Last e-mail didn't come through.
Eric

I will check it tomorrow. I hit the reply to soon. You should get another message. Thanks

coast2coast 02-19-2012 12:25 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
Dashpad? And heater control?

Todd68Chevy 02-19-2012 12:32 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
Quote:

Originally Posted by coast2coast (Post 5197557)
Dashpad? And heater control?

I know the dash pad is not good. The heater controls have the top lever broken off. I will check the rest of its condition tomorrow and see if I have another lever.

zicc1835 02-19-2012 12:42 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
ill take the grill let me know the ship to 07981

timzrides 02-19-2012 12:46 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
I'll take steering wheel. PM me payment info. PO money order would work best.


thanks,

tim

MadnessBigBlock 02-19-2012 12:48 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
Seat belts shipped to 58265 thanks
Posted via Mobile Device

MadnessBigBlock 02-19-2012 12:51 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
Also price on:
Hubcaps
Guage cluster
Choke cable
Posted via Mobile Device

Todd68Chevy 02-19-2012 12:54 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
Quote:

Originally Posted by zicc1835 (Post 5197580)
ill take the grill let me know the ship to 07981

As stated above the doghouse (grille, fenders and core support) on this truck is being looked at locally and I am waiting on an answer before they will be available. I do have a couple other 67-68 grilles I can get pictures and prices on. I do not think I have any of the hoops/ trim. I will check and let you know. Thanks, Todd

Quote:

Originally Posted by timzrides (Post 5197589)
I'll take steering wheel. PM me payment info. PO money order would work best.


thanks,

tim

I will get it off tomorrow and get better pictures and shipping price. I will PM my payment information after that. What is your zip code so I can figure a shipping quote? Thanks, Todd

Quote:

Originally Posted by MadnessBigBlock (Post 5197594)
Seat belts shipped to 58265 thanks
Posted via Mobile Device

I will get them out and better pictures. Thanks, Todd

Todd68Chevy 02-19-2012 12:56 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
Quote:

Originally Posted by MadnessBigBlock (Post 5197598)
Also price on:
Hubcaps
Guage cluster
Choke cable
Posted via Mobile Device

There is only 3 hub caps but I will check them out. Gauge cluster does have some cracks at the screw holes. I will check out better. Thanks

Delta9 02-19-2012 12:57 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. (as lons as the front clip is not destroyed)

Delta9 02-19-2012 01:02 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. i wont have my truck till the end of May if u want the trade. (as long as the 67 front clip is not destroyed)

Delta9 02-19-2012 01:03 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
sry my pics are not goin through

Todd68Chevy 02-19-2012 01:06 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
Quote:

Originally Posted by Delta9 (Post 5197609)
how much for the entire front clip to convert my 72 front end will also trade my front end minus the hood scoop. it would b a pick up/drop off deal, but it would have to wait till i get back from afghanistan in April. (as lons as the front clip is not destroyed)

I might have this front clip sold locally but If it does not go through I will put it up for sale. The grille is real good, fenders are decent, the rear bottom is rusted and the back side of the front cup is rusted, the outside looks pretty good. The core support looks real good on the left side but the right side has some rust. The grille hoops and headlight bezels are painted but look real nice. Wiring harness even looks good. I have not looked the hood over real good but it looks like it is not rusted along the edge but does have some bondo filling a dent. I will let you know if the local sale does not go thru. Be safe over there and thanks for all you do.

Meatman 02-19-2012 01:28 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
C20 badges shipped to 66614?

shawno72 02-19-2012 01:56 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
Hey Todd I am looking for a nice lower steel grille hoop, do you have one and how much shipped to 95242? Thank you.
Posted via Mobile Device

Delta9 02-19-2012 02:05 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
ok thnx just let me know how much or if u want to do a trade+cash deal i would like pics of the (problem areas if you dont mind.
Thnx again
Ken

duallyjams 02-19-2012 09:17 AM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
What size are the rims ? are all 4 a match with clips for the hub caps.

Todd68Chevy 02-19-2012 10:37 PM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
5 Attachment(s)
Well I got it pretty much apart today. I will be getting rid of what is let sometime this week so if you see something you need let me know. Here are some pictures of what is left. The cab and bed are rough.

I will catching up on prices and shipping so if you posted check the following threads.

The roof and back window area looks good but a little rust starting at the top of the windshield on the inside $75.00 no shipping-- does anybody need that?

Todd68Chevy 02-19-2012 10:50 PM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
3 Attachment(s)
Quote:

Originally Posted by too much stuff (Post 5197514)
Let me know on the steering box condition and price... Last e-mail didn't come through.
Eric

The box looks ok and the steering actually felt pretty tight. Looks like the box and pitman arm should fit in a Flat Rate box so $35.00 Shipped.

Todd68Chevy 02-19-2012 10:55 PM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
3 Attachment(s)
Quote:

Originally Posted by coast2coast (Post 5197557)
Dashpad? And heater control?

Like I stated before the dash pad is not good. The heater controls also has a few issues. The top lever is broken and I do not have another one at this time, the mounting hole threads are messed up and they had a bolt all the way thru with a nut on top- it worked but just not right, and one of the rivets that hold the front and back together has the head broken off. If you are still interested I would take $20.00 shipped for it.

Todd68Chevy 02-19-2012 11:06 PM

Re: Parting Out a 1967 Chevy C20 Small Back Window, Long Bed
 
5 Attachment(s)
Quote:

Originally Posted by timzrides (Post 5197589)
I'll take steering wheel. PM me payment info. PO money order would work best.


thanks,

tim

Tim, here are some close up pictures. The shipping will be $10.00 so that will be a total of $35.00. If you are interested in meeting me next Saturday morning, I have a trip in the works to come over to Decatur, IL and Springfield, IL and I could just bring it with me.


All times are GMT -4. The time now is 05:03 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com