Blazer bed cross sill
 

Does anyone have or know where i can get the bed floor cross sill that runs at the back of the rear wheel tubs and is recessed where it mounts to the frame.

Thanks

Re: Blazer bed cross sill
 

The last blazer I just list all the cross sills appear to be in good condition I can check it out and get pictures if so. Let me know if that's something you would be interested in.

Re: Blazer bed cross sill
 

please if you dont mind and thank you

Re: Blazer bed cross sill
 

That part is not available for the Blazer. I purchased one to fit the pickup and modified it. Worked perfect !

http://www.billstruckshop.com/Catalo...2_Jan_2017.pdf
Page 104

Re: Blazer bed cross sill
 

Its on the lift I will get some pictures tomorrow after work.

Re: Blazer bed cross sill
 

pics

Re: Blazer bed cross sill
 

more pics

Re: Blazer bed cross sill
 

That looks to far gone to bother with thanks for looking

Re: Blazer bed cross sill
 

hemi43 how much did you have to cut out of the truck cross sill to make it work on a 2wd blazer. Thanks for info

Re: Blazer bed cross sill
 

I can't remember, all I know is that it will work. Here's the only pictures I could find.

Re: Blazer bed cross sill
 

I've had this piece laying around forever, guess it served a purpose. I did the shttps://farm5.staticflickr.com/4750/...43a4267a_c.jpg[url=https://flic.kr/p/FexDg9]20180110_194838ame thing Hemi did, so I guess I cut off each end about 11"

sorry, been drinking for awhile, my typing is slurrrrrred

Re: Blazer bed cross sill
 

Hemi43, what did you use to finish the undercoat? I am debating between an epoxy primer, POR15, or open to suggestions. I have little to no surface rust.

Re: Blazer bed cross sill
 

You could always get one bent up at your local sheet metal working place.

Re: Blazer bed cross sill
 

does anyone have the measurements on this cross sill it will help in having one made. thanks

Re: Blazer bed cross sill
 

Don't use POR15 !! Great product over rusted steel, but that's about it. Some say they've had luck over sandblasted new steel, but I still wont use it. I used it once years ago on a Camaro trunk floor pan I installed, and I had major adhesion problems. The other issue is where it did stick, we couldn't get it off.

Over bare metal I only use epoxy. The underside of my truck was sanblasted, sprayed with epoxy, then top coated with a satin urethane black from KBS coatings. This was a real nice product to use, and is very durable. The top coat is sprayed wet on wet so there's perfect adhesion between the two products and no sanding in between.

https://www.kbs-coatings.com/KBS-Maxx.html

Re: Blazer bed cross sill
 

HVAC
I have a mint 71' floor hanging here on the wall. If the cross member you are talking about, is the one I have white arrow on, there is no recess in it where it bolts to the frame. The only one that recesses is the tall one in front of the tubs. The one I have arrowed is just a hat section 1" mounting lip x 1" tall x 1.625" across and 71.75" wide. If you need any other measurements let me know.

Richard


.

Re: Blazer bed cross sill
 

thank you for the info on this