Pics of bagged W/O Z,ed or PB fronts
 

I was wondering if there is a thread of bagged trucks or Blazers that don,t have any extra work done to the the front like pancakeing the crossmember or portbuilt or Z,ed frames,just simple bag jobs.I looked in the lowered section but not many people tell you if it is alterted.

Re: Pics of bagged W/O Z,ed or PB fronts
 

This has our Stage 1 Front kit. Airbag replaces the coil spring with an upper plate that bolts to the crossmember and a lower cup that rests in the spring pocket on the lower arm, and a shock relocation kit.

Rear is a Stage 2 Basic that has our two-piece bolt-in c-notch, an airbag that replaces the coil spring, a fully adjustable trac bar, and a shock relocation system.

Re: Pics of bagged W/O Z,ed or PB fronts
 

forgot to mention in the 73 and up era

Re: Pics of bagged W/O Z,ed or PB fronts
 

Just imagine that it's a square body! LOL

I will have to see if I can dig up some pics of a 73-87.

Nate

Re: Pics of bagged W/O Z,ed or PB fronts
 

While you looking for pictures of 73-87, if you have pictures of 64-66 with this setup please post some. Thanks

Re: Pics of bagged W/O Z,ed or PB fronts
 

Ask and ye shall receive!

Stage 1 front and Stage 2 rear basic:

Re: Pics of bagged W/O Z,ed or PB fronts
 

Thank you for the picture.
Is this a Forum member, I would like to ask the rocker to floor measurement when aired out. Im low now and I think if I have read right if I do this I could be higher than my height now when aired out. Or if you know the answers, again thanks.

Re: Pics of bagged W/O Z,ed or PB fronts
 

Hey ,I asked first. lol

Re: Pics of bagged W/O Z,ed or PB fronts
 

Squarebody discrimination.... :ito:

Re: Pics of bagged W/O Z,ed or PB fronts
 

http://i966.photobucket.com/albums/a...E00EA84501.jpg
http://i966.photobucket.com/albums/a...27683CAA7F.jpg
This is mine bagged currently, but I just got the front porterbuilt extreme dropmember in so it will be installed soon as I get it back from powdercoat! The rear I'm unsure what I'm gonna do yet, PB dropmember or custom cause it will have 24x15's out back.

Re: Pics of bagged W/O Z,ed or PB fronts
 

Yes, I am a member. Is this what you wanted? This is the very front of the bed where the cab ends and aired out. Bags is the way to go, very smooth. No regrets with PB products. Hope this helps.

Re: Pics of bagged W/O Z,ed or PB fronts
 

Mild porterbuilt on bags with 22" & 24" wheels

Re: Pics of bagged W/O Z,ed or PB fronts
 

thats as low as you're gonna get without cutting things up.

Re: Pics of bagged W/O Z,ed or PB fronts
 

Nice truck!

Re: Pics of bagged W/O Z,ed or PB fronts
 

Oh let me get in. PB with that 67-72 style truck how low is the cross member to the ground? Also with a bigger notch and the bags still in the stock spring location in the back how much lower will it go?

Re: Pics of bagged W/O Z,ed or PB fronts
 

I'm not sure but if it's close to or the equivalent of a Z then I'd assume its around 5 or 6". Based off people saying their bagged lca are 3" off and z'ing i believe is usually 1.5-3" raise?

Re: Pics of bagged W/O Z,ed or PB fronts
 

Bagged or cupped? kinda lost me there?

Re: Pics of bagged W/O Z,ed or PB fronts
 

Love those wheels!

Re: Pics of bagged W/O Z,ed or PB fronts
 

+1