The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Longer wheel studs? (https://67-72chevytrucks.com/vboard/showthread.php?t=456345)

OJ1988 03-30-2011 06:35 PM

Longer wheel studs?
 
Anyone know where I can find longer wheel studs for the rear on my 69?

.472"knurl 7/16"-20


Stock length is 1.5" I need 2"

Longhorn Man 03-30-2011 10:39 PM

Re: Longer wheel studs?
 
napa
Go in with your info and they should be able to get them if they don't have them on hand

cdowns 03-31-2011 09:27 AM

Re: Longer wheel studs?
 
much better to take an old one with you the important part is to make sure the splined part is the same size

local autoparts store are a great source for common autorarts i prefer NAPA and CARQUEST as they normally have more knowelageble better trained(some even know how to read thru parts books) counter people

from what i see most 7/16 are .480

rsavage 03-31-2011 10:52 AM

Re: Longer wheel studs?
 
If I remember correctly, and there is always the possibility that I do not, I couldn't find longer stock 7/16" studs with that knurl a couple of years ago. I had put some 1/4" spacers on to bring the wheels out a little and wanted longer studs as I had only about 5-6 turns of the lug nuts. Never found them and removed the spacers.

richierlb 03-31-2011 09:14 PM

Re: Longer wheel studs?
 
most parts stores around my area carry dorman studs. try this part # 610-157 the catalog says they are 3/8" to 1/2" LONGER

OJ1988 04-01-2011 12:09 AM

Re: Longer wheel studs?
 
Thanks for the leads guys.
From what I have found, there is not a longer version in .472. Some guys on camaro sites said they used the .480 studs with little problems installing.
The 610-187 appear to be .487
it's either longer studs or swap to 1" adapters.
Posted via Mobile Device

w00dst0ck 05-07-2018 08:58 PM

Re: Longer wheel studs?
 
7 years old, but in case anyone is looking.

Moser makes a 7/16-20 .480 knurl. Part #8050

10x for $30 on amazon prime.

hotwls13 05-07-2018 09:37 PM

Re: Longer wheel studs?
 
Quote:

Originally Posted by w00dst0ck (Post 8256561)
7 years old, but in case anyone is looking.

Moser makes a 7/16-20 .480 knurl. Part #8050

10x for $30 on amazon prime.

Just did mine last week on 70 gmc 1/2t. They are Dorman 610-186-1. About the same price at amazon or $2.50 each at autozone. They are approx 1/4” longer than the factory ones. ;)


All times are GMT -4. The time now is 03:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com