4X4 3/4 ton stepper, Craigslist
 

If the vin is correct it not a factory 4X4 ?

https://albuquerque.craigslist.org/c...230294620.html

Re: 4X4 3/4 ton stepper, Craigslist
 

could be a 2wd body that was transferred

Re: 4X4 3/4 ton stepper, Craigslist
 

Also shows to be a 1/2 ton...?

Re: 4X4 3/4 ton stepper, Craigslist
 

I never have seen a long bed step side as a 4x4,most of them was fleet/gov trucks so they bought the cheapest bare basic trucks.If it the vin says 2wd then its had a body swap or a 4x4 swap done on it.But to me i like it and would drive that truck as is.

Re: 4X4 3/4 ton stepper, Craigslist
 

I like a 4x4 Long Step but I agree that I haven't seen many 4x4. It does have the 20 badge on the fender but also has a bit of a funny rake to it. Either way, if properly done its still cool.

Re: 4X4 3/4 ton stepper, Craigslist
 

I actually like it, if done right...

Re: 4X4 3/4 ton stepper, Craigslist
 

I really like it. Probably just a frame swap, which would be the same frame it would have had if it had come from the factory 4wd. Not many bought the long Stepsides in the square body, but they could be had and they are out there. Yes, they are rare. GM finally stopped offering them after '84, with so few being ordered.