1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BFG's
 

1971 Chevrolet K20 burb into a K30 rock burb family hauler. Attachment 1271229

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Made a deal on the burb yesterday, pick it up Sunday morning.

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Yes I know it has a gmc grill po installed that from a collision repair. I kinda like it, gonna leave it. Currently the truck runs and drives so the mods will be over time, one at a time so the truck isn't down huge amounts of time.

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

I was born in 1971 and have been looking for a 71 burb for a while. Found a 71 pu initially but now found this burb I'm really excited about the build. I am an ase master certified GM tech. I am retired now and just play with my toys in my private machine shop.

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

The build; I have a new crate engine LS3 hotcam Mtr 520hp, stage 4 4l80e trans, rebuilding a np205 with new timken bearings seals and gaskets. Rebuilding a dana 70 front axle with new spicer bearings seals gaskets king pins and u joints 4.10 Yukon gears and Detroit locker, rebuilding a 14 bolt full float rear with new timken bearings seals and gaskets 4.10 Yukon gears and Detroit locker rear disc brake conversion, New skyjacker 4" all spring lift kit, and new BFG 35" all terrains. I have a 73-87 burb safari full length roof rack that I will retrofit. Will build from scratch front and rear rock crusher bumpers with winches. Build full side rock crusher step bars too. I have a safari snorkel kit for a 73-87 burb I will retrofit as well.

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Plan on putting late model burb seats in it that I already have too. Paint will be themed like a 71 cheyenne super pu, white roof, med blue, white stripe down side then med blue at bottom again.

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Attachment 1271234. Donor truck for a lot of the parts. Those are the tires and wheels.

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Attachment 1271237. Disc brake kit I built

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Attachment 1271238. Some of the spicer parts have come in

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Attachment 1271239. Warns came in

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Attachment 1271240. Griffin 3core aluminum came in

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Attachment 1271241. 2004 burb all 3 rows of seats will go in the 71.

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

It's going to be an interesting build. That's a nice parts truck. Do you plan to use it's longer springs? You might need a lift as the "K" - LS conversions I've seen leave little front axle-to- oil pan clearance. You might consider cross over steering as these 4x4's can have some bump steer.

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Not using the lift from the truck. Using hydraulic assist steering. The ls3 crate motor has a corvette low profile oil pan so clearance won't be an issue like on a ls truck pan.

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Forgot to mention using hydro boost setup from 1 ton, and 4 wheel disc brakes

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Thanks for the info on the bump steer dave

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Attachment 1271485. Interior pic currently

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Attachment 1271486. Current 350 v8

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Attachment 1271487. Gmc grill on Chevy looks good I think

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Attachment 1271559. Was a rural ambulance with small raised roof

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Gmc grill on Chevy looks good I think. Attachment 1271565

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Overall I like it

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Can't wait to see the finish product those old suburbans are pretty sweet

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

Looks like a great project/starting point. Any idea what the seats that are in in now are out of? I'm interested in how the late model burb seats will fit too.

Is it me or is the roof raised up?

Paul

Re: 1971 K30 burb - LS3, 4l80e, np205, Dana 70f, 14bff, Detroit lckrs, 4"lift, 35" BF
 

The seats appear to be '93 Suburban seats. i was going to ask about the roof also. I thought it just might be an illusion.