68 gmc/c4
1 Attachment(s)
We're starting a new project! This was basically a 1968 GMC long bed pick up truck we shortened Attachment 1584978the frame and are going to put in a front and rear suspension out of a C-4 Corvette! This will be our test truck for this type of suspension the plan is to start developing chassis with this suspension so that people can directly bolt on their cab and bed.
|
Re: 68 gmc/c4
1 Attachment(s)
Attachment 1584980We've shortened the frame tomorrow Will put it up on the jig and mock up the rear end!
|
Re: 68 gmc/c4
1 Attachment(s)
Originally we were just going to make it a clean lowered shop truck before we decided to make it a test truck for the C4 chassis!Attachment 1585092
|
Re: 68 gmc/c4
Great another GMC! Looks like you're off to a good start. I'm along for the ride and originally from Chula Vista. Good luck with it. :gmc2:
what's a C4 chassis? I'm ignorant. |
Re: 68 gmc/c4
We're taking C4 corvette suspension parts and installing them on to a C10 chassis! We're trying to develop something more along the lines of performance rather than airbag and we're trying to make it to where somebody can just both their cab in bed onto the chassis without any Sheetmetal fabrication!
|
Re: 68 gmc/c4
In
|
Re: 68 gmc/c4
1 Attachment(s)
We mocked up the rearend today!Attachment 1585220
|
Re: 68 gmc/c4
1 Attachment(s)
Got more work done today!Attachment 1585459
|
Re: 68 gmc/c4
1 Attachment(s)
Made the pinion support! Attachment 1586704
|
Re: 68 gmc/c4
Tagging along...
|
Re: 68 gmc/c4
What's happening AD? It's been awhile since I've been on here!
|
Re: 68 gmc/c4
beefing that bad boy up eh?
|
Re: 68 gmc/c4
Yes sir I hope to represent my GMC brothers well!
|
Re: 68 gmc/c4
1 Attachment(s)
Attachment 1587929The front cross member arrived today!
|
Re: 68 gmc/c4
Im in .
|
Re: 68 gmc/c4
Welcome guys! Thanks for following
|
Re: 68 gmc/c4
got my interest...
|
Re: 68 gmc/c4
1 Attachment(s)
We mounted the front crossmember today! We're waiting on the driveshaft loop we need Still mount the rear shocks and a few details before we sandblast the chassis and then box in the frame rails!Attachment 1588254
|
Re: 68 gmc/c4
Quote:
Did you fab the crossmember? |
Re: 68 gmc/c4
Hi Doug good to be back how's the sub going? I cruise over to your page and check it out! Ron
|
Re: 68 gmc/c4
im in
|
Re: 68 gmc/c4
1 Attachment(s)
I have your trucks brother, and you are doing exactly what I plan to do to my 68 GMC. Are you planning on doing a suspension kit? Also who did your front cross member?
What a great project. Can't wait to see the outcome! |
Re: 68 gmc/c4
I'm in. Cool concept. It would be nice to see a suspension setup like this available as you are planning.
|
Re: 68 gmc/c4
75dually you have my trucks twin! hewittca thanks welcome aboard I hope this build works I'd like to build more stuff along the performance side rather then air ride!
|
Re: 68 gmc/c4
Quote:
I can't believe just how similar these two trucks are! LOL!! |
All times are GMT -4. The time now is 10:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com