The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (http://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (http://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   Need measurement for accessories please? Between fenders and frame rails please (http://67-72chevytrucks.com/vboard/showthread.php?t=766997)

uhcoog1 07-06-2018 10:22 PM

Need measurement for accessories please? Between fenders and frame rails please
 
I need a couple measurements please. Truck is apart at the painters.

For those with an LS swap- what is the distance between the frame rails at the front edge of the accessories? And the same on the fenders please around 3-3.5" above the midpoint on the crank (in below pic- where the PS reservoir sits).

Trying to determine if the gen 5 accessory drive from Holley will fit. See below. Any help appreciated!

Thanks guys

https://images.holley.com/20-180_dim17341.jpg

_Ogre 07-06-2018 11:16 PM

Re: Need measurement for accessories please? Between fenders and frame rails please
 
year of truck might get you some answers

Fred T 07-07-2018 05:33 AM

Re: Need measurement for accessories please? Between fenders and frame rails please
 
In another thread he asks about a 48 3100.

mr48chev 07-07-2018 12:30 PM

Re: Need measurement for accessories please? Between fenders and frame rails please
 
This gives the outside measurements in some spots in the area of question. http://s173.photobucket.com/user/mr4...tml?sort=4&o=3

You would have to subtract the width of the frame rails.

I have several images of the frame drawings in that album.

uhcoog1 07-07-2018 05:14 PM

Re: Need measurement for accessories please? Between fenders and frame rails please
 
Quote:

Originally Posted by _Ogre (Post 8295797)
year of truck might get you some answers

Apologies. Yes, 1948.

Quote:

Originally Posted by mr48chev (Post 8296045)
This gives the outside measurements in some spots in the area of question. http://s173.photobucket.com/user/mr4...tml?sort=4&o=3

You would have to subtract the width of the frame rails.

I have several images of the frame drawings in that album.

This is quite helpful. Thank you!

mr48chev 07-09-2018 10:45 AM

Re: Need measurement for accessories please? Between fenders and frame rails please
 
Old photo that I had in my album but you can get real close on the between the rails measurement with it with a bit of math. I'm going to be lazy and just post the link to the photobucket photo that you will have to open. http://s173.photobucket.com/user/mr4...l?sort=3&o=103


All times are GMT -4. The time now is 03:46 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com