66 Pro Street Build (Domeringer)
Hi All, Have been lurking this great forum for a while. I'll start by introducing myself... My name is Gary and I live in Connecticut. Had a shop that specialized in drag bike chassis and go fast work... decided it was time to close down and have some fun with other things. Bought this truck a while back and drove it for a year... but the drag racing in my blood took over again. I'm going to pretty much scratch build the whole setup, any questions or advise will be greatly appreciated.
The truck was purchased tricked out old school and had this sticker on the back window... so that's what we'll call it! Think it will live up to it's new name ;) Here's some pics of the truck the way I bought it. 350 (010 block) with an M20 tranny, 2 inch drop spindles, 3" drop springs up front, 4" drop springs in the rear, disc brake conversion up front. Had some issues but all in all very cool truck and had a blast cruising with it. http://garyv.smugmug.com/1966-C10/i-...icture3-XL.jpg http://garyv.smugmug.com/1966-C10/i-...icture4-XL.jpg http://garyv.smugmug.com/1966-C10/i-...icture2-XL.jpg http://garyv.smugmug.com/1966-C10/i-...icture1-XL.jpg http://garyv.smugmug.com/1966-C10/i-...icture6-XL.jpg http://garyv.smugmug.com/1966-C10/i-...icture7-XL.jpg Here's some pics of where we are at this week. Will try to do my best at giving a weekly update. No time today but will post up the plan tomorrow http://garyv.smugmug.com/Build-Pictu...e3_29_2-XL.jpg http://garyv.smugmug.com/Build-Pictu...e4_13_3-XL.jpg http://garyv.smugmug.com/Build-Pictu...e4_13_4-XL.jpg http://garyv.smugmug.com/Build-Pictu...e4_13_5-XL.jpg http://garyv.smugmug.com/Build-Pictu...e4_13_2-XL.jpg http://garyv.smugmug.com/Build-Pictu...e4_13_6-XL.jpg |
Re: 66 Pro Street Build (Domeringer)
Welcome aboard!
That's already a great looking ride so i can't wait to see what you're gona do with it. :D |
Re: 66 Pro Street Build (Domeringer)
Very Cool Truck. You have the exact lowering setup that I plan to run. So now I know what it will look like. Your engine looks almost spot on to what mine did.
Bret |
Re: 66 Pro Street Build (Domeringer)
Quote:
|
Re: 66 Pro Street Build (Domeringer)
Quote:
|
Re: 66 Pro Street Build (Domeringer)
Ok basic laundry list...
LS1 about 425 HP N/A all ARP Twin Turbo setup shooting for about 1000 HP 4L80E Tranny Strange center housing 3.25" tubes, back brace Strange Ford 9" nodular iron case (3.25 bore) Spool with 35 Axles Autoweld Ultimate II 4 link, custom bent 2 X 4 frame rails. Nice stuff! Wilwood rear discs W/Parking Brake Will post more parts later... This weekend plan to remove the body and cab top to send off for media blasting... will post picks |
Re: 66 Pro Street Build (Domeringer)
1000 hp :metal::metal::metal:
Truck is sweet! |
Re: 66 Pro Street Build (Domeringer)
Welcome to the forum! Looked like a very neat truck to begin with, and should be a lot more fun when you're finished!
|
Re: 66 Pro Street Build (Domeringer)
Welcome from Clinton ct, my dad and i are also building a 66. It's a k-20. Evan396
|
Re: 66 Pro Street Build (Domeringer)
:hi: and :welcoem: to the site !!
I also have a 66, and I really like your wheels :metal: |
Re: 66 Pro Street Build (Domeringer)
welcome to the MADNESS. nice truck. if you go to the engine and drivetrain section on this site there is a guy that either won or came in second on the PINKS show. he might help you set up the truck to run well!!!!
|
Re: 66 Pro Street Build (Domeringer)
Quote:
Quote:
Quote:
Quote:
Quote:
|
Re: 66 Pro Street Build (Domeringer)
Welcome to the forum Gary :D
This sounds like my kind of build.......I'll be watching. |
Re: 66 Pro Street Build (Domeringer)
Quote:
|
Re: 66 Pro Street Build (Domeringer)
OK Plans of having the cab on a trailer today and off to the media blaster were nixed by the boss... but it's ok to sit here and post pics. So here's some part pics and info for the build.
Autoweld Ultimate II Pro Street Full Clip As mentioned I will fab the setup to try and keep costs down. Urethane Rod Ends, Frame Brackets, Rear Housing brackets, Shock Brackets and Wheelie Bar Brackets, Custom Frame Rails http://garyv.smugmug.com/Build-Pictu...e3_29_3-XL.jpg http://garyv.smugmug.com/Build-Pictu...e4_20_1-XL.jpg More parts... Strange Engineering Bare Housing (3.25" Diameter Strange part number H1112) 3.25" X 1/4" Wall DOM Tube http://garyv.smugmug.com/Build-Pictu...e4_20_5-XL.jpg http://garyv.smugmug.com/Build-Pictu...e4_20_6-XL.jpg Wilwood 11" Diameter DYNAPRO LOW-PROFILE 2.50" OFFSET, BIG BEARING FORD NEW STYLE (Torino ends) Wilwood part number 140-11389-D Last the sneakers... Centerline Warrior 15" X 15", 5/8" X 5X5" BC, Mickey Thompson 29" X 18.5"-15LT Hope you all have a nice Easter Holiday! |
Re: 66 Pro Street Build (Domeringer)
SWEET!! 1000hp
Im in for this one, are you going to make your own rear wheel tubs or use the factory style but just widen them?? I used 67-72 style tubs an widened mine like 4.75" I will be putting a 29x15x15 on the back, just got to get the right backspacing and offset for the rims to fit right |
Re: 66 Pro Street Build (Domeringer)
That's a gonna be one heck of a c-notched frame! LOL! :chevy:
|
Re: 66 Pro Street Build (Domeringer)
very cool project, can't wait to see this done
|
Re: 66 Pro Street Build (Domeringer)
Quote:
Quote:
Quote:
|
Re: 66 Pro Street Build (Domeringer)
if I remember right the 29x15x15 will fit, just have to have the right offset and backspacing! my tubs are 16in. from the inner bedside, so there maybe an inch or so! when I cut my steel floor out it pretty much goes straight up from the frame! there's a thread in the sub section 'rocktonka' is the member, check out what he has done! it shows that that's pretty much the biggest tire you can go with without cutting the frame!
|
Re: 66 Pro Street Build (Domeringer)
Quote:
|
Re: 66 Pro Street Build (Domeringer)
More parts came in :c2:
Aldan Eagle Double Adjustable Coilover, 17" Aldan part number 758, Made in the USA Strange Engineering 3.25" Bore Ford Housing, Strange part number N1906 |
Re: 66 Pro Street Build (Domeringer)
Hi all, Been a while since I posted last and figured it was time for an update and some pics. Left off posting that we were going to remove the cab... done! Have spent a lot of time building a jig for this project... here's progress so far. Should start some frame cutting and welding this weekend.
http://garyv.smugmug.com/4-Link-Back...re5_19_1-L.jpg Cross member layouthttp://garyv.smugmug.com/4-Link-Back...re5_19_3-L.jpg http://garyv.smugmug.com/4-Link-Back...re5_19_2-L.jpg |
Re: 66 Pro Street Build (Domeringer)
Welcome Gary. This looks to be a bad ass project. I'll be following. :metal:
|
Re: 66 Pro Street Build (Domeringer)
Sweet looking build. I'm gonna watch this one
|
All times are GMT -4. The time now is 01:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com