67 long box
 

I started this build about 2 years ago and lost a year and a half due to car accident but I've been hard at it since march.

Re: 67 long box
 

lots of metal work

Re: 67 long box
 

cab came off with no problems

Re: 67 long box
 

the floor is done

Re: 67 long box
 

total disassemble into tiny pieces

Re: 67 long box
 

lots of cutting, grinding and welding

Re: 67 long box
 

Great progress. What are your build plans?
Keep it original, mild modifications or a full blown trailer queen?
Jake

Re: 67 long box
 

custom trail arms and panhard . put a small notch in it to get it down

Re: 67 long box
 

new custom sway bar, no shocks or springs till later' engine done and ready

Re: 67 long box
 

moved the cab out and bed in. cut all the bolts and rails

Re: 67 long box
 

found more holes, so I'm raising the bed

Re: 67 long box
 

I keep finding more holes. but had to modify anyway

Re: 67 long box
 

mild street truck with great handling a/c p/b p/w just a good daily

Re: 67 long box
 

I really like the way that you fabricated the rear sway bar.
You could sell a ton of those.

Re: 67 long box
 

diggin it!

Re: 67 long box
 

Great progress! Looks good. Keep posting progress shots.

Re: 67 long box
 

I hate spending money on parts, this way I know what I'm getting and the quality is up to my standard. Nothing worse that getting parts that are not right. that sway bar was made from chromoly 1" 4140 and 4130 hss 2"x4". I hope it handles well.

Re: 67 long box
 

inner fender raised 2"

Re: 67 long box
 

Bent the new lip down to stiffen the panel, the repair didn't chew up to much old paint so it should be an easy blend in patina

Re: 67 long box
 

The other wheel house raised, now on to the wheel well widening

Re: 67 long box
 

We just finished my father in laws Hemi Eh. It's a 331 hemi with t5 trany, out of a mustang. It has a clutch and torque converter, very strange to drive. We custom fabed the frame and body parts to match

Re: 67 long box
 

first one cut, and added 2". now I can add two more inches of rubber.

Re: 67 long box
 

your metalwork is amazing!...nice job.

Re: 67 long box
 

Thanks it's kinda how I got the name metal doc, Derek.

Re: 67 long box
 

Doesn't look like it but that was 8 feet of weld. First one done with a coat of primer to prevent rust and start welding again.