The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)

- - NP 246 Transfer case (https://67-72chevytrucks.com/vboard/showthread.php?t=772271)

Rigmover

09-29-2018 03:52 PM

NP 246 Transfer case

What size socket does one need to remove the filler nut on a np 246 transfer case on a 95 GMC 4X4 can not get a crescent wrench on it any help would be greatly appreciated Thank You..

95 S_Trucker

09-30-2018 09:43 AM

Re: NP 246 Transfer case

They should be 18mm. I can double check at work tomorrow.

But the first year for the 246 was 98, and you have a 95

Manual lever on floor, np241
3 button switch, np243
4 button switch, np246

Rigmover

09-30-2018 12:10 PM

Re: NP 246 Transfer case

Quote:

Originally Posted by 95 S_Trucker (Post 8354229)

They should be 18mm. I can double check at work tomorrow.

But the first year for the 246 was 98, and you have a 95

Manual lever on floor, np241
3 button switch, np243
4 button switch, np246

Sorry your right its a NP 241 as it has a MG5 Trans in it and found the size of the filler nut is a 30mm all good now.

Thanks

All times are GMT -4. The time now is 04:26 PM.