250 inline 6 value
 

Well the frame is shot on my 68 c10 and i was wondering what do you guys think a fair price on craigslist would be for the strait 6 in good running condition all original with new plugs and wires? Thanks.

Re: 250 inline 6 value
 

-
Too bad you are not closer. I would give you a good frame....

LockDoc

Re: 250 inline 6 value
 

The truck is also very rusty, i'm just going to use most of the good parts to fix another one of my trucks. Thanks for the offer though.

Re: 250 inline 6 value
 

Around here I ocassionally see a 250/6 on CL for $200-500,Unfortunately I don't know if they ever sell.The other thing about them is they "Runs good" but are out of the truck.So how do I know it runs good?

Re: 250 inline 6 value
 

If they are pretty much complete & you have a jump starter or battery and an oil pressure gauge you can start them sitting on the floor. I just did that with 2 292's I just got. Just attach the oil pressure gauge, hook the negative cable to the block, positive cable to the large post on the starter solenoid, a jumper wire from the positive cable to the coil or HEI, pour a little gas in the carb and momentarily short the positive cable to the S terminal on the solenoid. It should fire right up. Listen to how it sounds and check the oil pressure. You may have to start it a couple of times to get the oil pressure read.

LockDoc

Re: 250 inline 6 value
 

Yah that a good idea, i also have a stand to run engines on with ignition and a radiator. It helped me sell a 350 i had. I figured people would choose hearing one run over taking someones word as there are alot of untrustworthy people out there. Like the guy i got this truck from, my dad picked it up for me and he just had shoulder surgery and didnt look it over. He told me i could drive it home and the frame is really bad. He failed to mention that lol.

Re: 250 inline 6 value
 

This pic is when i first got home to see it. After a couple small rides the rear coil is now coming through the rotted bed floor. I think thats about as bad as it gets.
http://i651.photobucket.com/albums/u...t/102_2735.jpg

Re: 250 inline 6 value
 

6 cylinder motors in this area you just about have to pay somebody to take them away// i had a 250 5years ago couldnt give it away for free with 6months of listing on craigs was hooked up an ran good finally went to scrap yard i think i got like 57cents for it

Re: 250 inline 6 value
 

Pretty much the same around here. If it's not a V-8, nobody is interested. It is amazing how things change. 25 years ago I had a couple good working th350 trannys and couldn't give them away because they weren't th400's. Same with the 400 Pontiacs. Scrap guy used to dump whole engines by my garage, I'd strip the heads off and scrap the rest.

Re: 250 inline 6 value
 

There is a 250 for sale here locally for 250. Been on there for 3-4 months now and has gone down from 300 at least. Same guy is trying to sell a SM465 for 350. But he also has it listed in a separate ad for 300. I think he is just your run of the mill junkyard guy. I think both of them are worth it if it is what you want. I am vaguely interested in both but I would go in there lowballing and deal from there.

Re: 250 inline 6 value
 

Ok thanks guys i kind of had a feeling it wasn't worth much i was just kind of wondering if i should worry about pulling it but i will probably just leave it in.