Re: 402 BBC for sale
how much to ship to 01108? unless you aren't shipping to anywhere......then i apologize for asking
|
Re: 402 BBC for sale
BUMP, good buy for someone
|
Re: 402 BBC for sale
I might be interested!!!!!!
Bling Bling BIG BLOCK in my 67 SWB :O) Can you drop it off at a conway freight depot. I can get very cheap freight charges thru work!!! Let me know |
Re: 402 BBC for sale
None of the links seem to be working. Great deal!
|
Re: 402 BBC for sale
Quote:
Thanks, Kade |
Re: 402 BBC for sale
Quote:
Thanks, Kade |
Re: 402 BBC for sale
A little history on the motor. This motor came in my blazer which I have had a year and 5 months. The blazer was built in the early 90's and the motor was rebuilt back then, the motor only has around 3 to 5 k miles on it since it was rebuilt. I drove it 4 hours home and have drove it on several 400 plus mile trips before I tore into it. It never smoked when it had sit for a month without cranking or while driven. The motor always held great oil pressure and always ran cool. I pulled the pan a checked the bearings and they all looked good. The motor was very clean with no buildup anywhere. The cylinder walls looked good also. The heads are 206 heads, closed chamber, oval port, with 97 cc combustion chambers which should put the compression around 9.5:1. The heads have edelbrock sure seat valve springs installed and 1.7 roller rockers. The motor has a edl-7162 cam in it with new lifters, 3/8 pushrods and a edelbrock dual roller timing chain. It has ARP head bolts, patriot clipsetter headers that are 3/4 lenght and ceramic coated, new solenoid, new rear main, new pan gasket, chrome timing cover. The serp brackets are in good shape and have a new alternator with the plug that you can splice into your harness, new water pump, new water pump pulley, new crank pulley, new tensioner and pulley, the p/s pump is a 3 port so you can run hydroboost if you want to or just plug the extra port. The a/c compressor is shot so it will have to be replaced or buy the a/c delete pulley to go in its place. The motor will need some touch up on the paint where I have nocked it off pulling the motor. It also has a new balancer that was a major pain in the ass to get on there, we had to make out on installer to put it on since the parts stores where closed on sunday, it was a long grade 8 bolt and we used a bearing and some washers to get it on there. After we got it on and before we removed the bolt I had lost the balancer bolt, I cut the bolt off that we used to install the balancer and put a washer, loctite, and a nut to hold the balancer on the crank. To me it is the same as having the right bolt becasue it serves the same purpose and you cant see the nut on there with the pulley installed, this is not some half ass work so the balancer will fall off. I will also through in the radiator hoses since the upper was a major pain in the ass to find since a 67-72 truck or blazer never had a serpentine belt setup.
Let me know if you have anymore questions. Thanks, Kade |
Re: 402 BBC for sale
I'm still game.............
Can you tell me the casting numbers on the block and casting date? Can you send me the address the motor is at so I can find a close Depot??? Let me look up the local conway terminal near your house and I'll let you know how far away it is. Thanks Chad |
Re: 402 BBC for sale
Quote:
3950 Co Rd 63 Centre, AL 35960 This is a business with a forklift no dock. I will get the casting #'s tonight. Thanks, Kade |
Re: 402 BBC for sale
4 Attachment(s)
|
Re: 402 BBC for sale
4 Attachment(s)
|
Re: 402 BBC for sale
Quote:
I will get them tomorrow. |
Re: 402 BBC for sale
ttt for ya
|
Re: 402 BBC for sale
I'm going to pass on the 402!
I just picked up 2 SWB trucks and found a nice 396 BB locally....... Thanks! TTT for ya |
Re: 402 BBC for sale
Kade, I have a fellow near me that may be interested, I'll get back with you. Can you email a phone number so he can call you and axe some questions?
|
Re: 402 BBC for sale
Quote:
|
Re: 402 BBC for sale
PM received.
|
Re: 402 BBC for sale
Selling the shorty headers PM pls
|
Re: 402 BBC for sale
Is the motor still 4 sale?
|
Re: 402 BBC for sale
Quote:
|
Re: 402 BBC for sale
Quote:
|
Re: 402 BBC for sale
Quote:
Thanks |
Re: 402 BBC for sale
Quote:
Thanks, Kade |
Re: 402 BBC for sale
Well since no buyers I am going to take the motor over to my buddies shop and store it there till I can find me a beater to put it in. Thanks for all the replies and the interest. I have to get it out of my old man's way.
Thanks |
All times are GMT -4. The time now is 07:00 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com