Barely Legal Welding and Fabrication
Hey every one, my name is Richie from Barely Legal Welding and Fabrication. We are looking to advertise on a few more forums and i ran across this one, hoping to help some of you guys out with parts. I just need to know who i need to contact about advertising here, because we have products(Control arms, link kits ect...) for 1960-1987 c-10, c-20 and c30 trucks and suburbans. So eather point me in the right direction or pm me the pricing.
Thanks and we hope to be some help to some of you. Richie |
Re: Barely Legal Welding and Fabrication
Welcome from mn. Contact josh, or liz and i am sure they can set you up. (that is their board names). Eric
|
Re: Barely Legal Welding and Fabrication
Welcome to the board from Texas
|
Re: Barely Legal Welding and Fabrication
:welcome2: FROM KNOXVILLE TN!!!
|
Re: Barely Legal Welding and Fabrication
:welcome2: from Knoxville Tn....
|
Re: Barely Legal Welding and Fabrication
Welcome from FT Worth TX.
|
Re: Barely Legal Welding and Fabrication
Welcome aboard from Northern California!
|
Re: Barely Legal Welding and Fabrication
:welcome2: from CT!
Frank |
Re: Barely Legal Welding and Fabrication
thanks every one for the welcome. here is a pic of my 1990 square body 1 ton.
http://a591.ac-images.myspacecdn.com...42a0a5bc16.jpg http://a827.ac-images.myspacecdn.com...90270b8672.jpg http://a163.ac-images.myspacecdn.com...5bb6116c6a.jpg http://a888.ac-images.myspacecdn.com...18e6d62a87.jpg http://a358.ac-images.myspacecdn.com...7e4434b61d.jpg http://a544.ac-images.myspacecdn.com...cb6d56b247.jpg |
Re: Barely Legal Welding and Fabrication
Welcome... glad to see somebody else cross over from streetsource too.. good work as always
|
Re: Barely Legal Welding and Fabrication
Quote:
Richie |
Re: Barely Legal Welding and Fabrication
:welcome2: to the board from Mid-MO!!!
|
Re: Barely Legal Welding and Fabrication
Quote:
did the tierod work on that. Are those special balljoints and a frames that thing is on the ground |
Re: Barely Legal Welding and Fabrication
:welcome2: from South Texas!:D
|
Re: Barely Legal Welding and Fabrication
Quote:
yes it lays the frame, the A-Arms our our own brand and the upper arms use our Unijoints insted of ball joints. We fliped the tie rods to the under side, just untill i get a chance to make No Notch Tierods for it. Richie |
Re: Barely Legal Welding and Fabrication
Awesome and welcome to the board from TRUCK BUILDER magazine!
|
Re: Barely Legal Welding and Fabrication
thanks again to all the new welcomes, seems to be a pretty cool site.
Richie |
Re: Barely Legal Welding and Fabrication
:welcoem: from OKC! Very cool ride man, i have always wanted a slammed dually like that:metal:
|
Re: Barely Legal Welding and Fabrication
welcome!!! cool rig, you tow with it?
at the top left of the page click on "user cp" scroll down the page. left side click on "paid subscriptions" there you can pay for a "vendors subscription" |
Re: Barely Legal Welding and Fabrication
Quote:
Richie |
Re: Barely Legal Welding and Fabrication
Quote:
ya i tow our trailer we take to shows(stores all our products we display). THe rear bags them selves will lift 6000lbs a peice giving me the ability to have up to a 12,000 lb tongue weight lol(which in no way i recomend doing , this just gives you an idea on the towing capicty it has) , i can pretty much hook on to anything the motor and tranny will pull down the road. I needed a tow vechile and was not giving the dealer ship $40,000.00 for some new plastic truck. So i keep my eye out for a square body and one day i saw the truck, guy owned it in tennesse(almost perfect body low mile motor, junk interior) and got the truck for $2,800.00. Then we brought it in the shop designed some parts off it and baged it, and put 19.5"rims w/225-70-19.5 tires. We where going to do semi's but after we bought a wheel milled it down from 22.5" to 22" we had hardly and rim bead left and i wasnt riding my wife and kids in someing that wasnt safe, so i opted for the 19.5". which is nice i can drive over any thing i did before so stopping for train tracks or not having to worrie about hitting a pot hole. lol Richie |
Re: Barely Legal Welding and Fabrication
Welcome to the forum BarelyLegalFab. Glad to see another square body fan on the site. Please come visit us in the suspension forum. You will find a lot of the industry pro's hang out there. Your input would be greatly appreciated.
|
Re: Barely Legal Welding and Fabrication
nice work and cool truck. I am another crossover from Streetsource. This site has level headed and knowledgeable people. WELCOME!!!!
|
Re: Barely Legal Welding and Fabrication
welcome to the board
love those layed out duallies, ive always wanted one myself i plan on layin frame with my truck eventually |
Re: Barely Legal Welding and Fabrication
Quote:
will do , looking forward to helping out on this site and it will be nice to chat with other people like my self. Richei |
All times are GMT -4. The time now is 05:19 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com