My 84 K10 project
OK, I'm going to try and do a build thread. It'll be slow, and a budget deal. This will be my daily driver, so I'm going to try and get the engine in, 700R switched to a 350 turbo as soon as I can. I have done installed new ball joints, 1 RS tie rod end, calipers, all brakes including wheel cyl, spring kit, axle bearings and seals, front wheel bearings and seals. I've put a turn signal deal in the column along with a new dimmer switch, 2 sealed beams, and I have new tail light lens with chrome along with the housings for the rear. Pics of the engine I just finished.
|
Re: My 84 K10 project
Try again, cross your fingers.
|
Re: My 84 K10 project
2 Attachment(s)
Having problems with pics, bear with me here, not to good at this.
|
Re: My 84 K10 project
1 Attachment(s)
Weel, finally, they're a little big, but they are right side up. I'll post a pic of the truck also, later I'll post more. The engine is a .030 over stk short block, flat tops with a Lunati voodoo cam, hyd, the 781 heads have 2.19, 1.88 stainless valves, been all gone through with new springs, retainers and a 3 angle valve job. I had all this stuff already, so I went with what I had. MSD street fire dist, Wieand intake. Stk rockers, cheap Summit valve covers.
|
Re: My 84 K10 project
1 Attachment(s)
Interior as it looks now.
|
Re: My 84 K10 project
2 Attachment(s)
I made my own center trim for the grille, turns out I had a 86 grille in my truck and I bought an 84 so when it wouldn't fit I made my own.
|
Re: My 84 K10 project
Anyone going to give me some comments? The Good, the Bad,the ugly? Waiting on some modivation, and insperation here,
|
Re: My 84 K10 project
Truck looks like a good solid start, and your engine looks very nice! Why are you swapping out the 700r4 for a th350?
|
Re: My 84 K10 project
looks like a nice start. why use a weak tranny behind a stout motor though? go th400 at least...4l80e if you can swing it.. well worth the $ my $0.02
|
Re: My 84 K10 project
350 will be fine. Friends building it and he done all my glides in the dragster I had and he done the 350 turbo in my chevelle, it puts out way more than this 454 ever will. The 700 would live with enough money put into it, but with 3.08's and 11.50 tires, I don't need it. It seems the interior trim is pretty brittle. Pulled the head liner out and it breaks if you look at it wrong. Got a headliner kit to recover it, dash had a cover over it, it was cracked, dash pad looks even worse. Need at least a left side armrest, and a few other things for the interior. Guess I'll have to sell my sbc tunnel ram set up to fund this project. At least get the interior all together.
|
Re: My 84 K10 project
I like what you did with the grill. Get some pics of it installed already...geesh. :)
|
Re: My 84 K10 project
Cool truck. Motor looks great.
|
Re: My 84 K10 project
Right now the truck looks like it does in the pic. Need to make some money.
|
Re: My 84 K10 project
4 Attachment(s)
Update time, I've been doing body work, sanding and all the fun stuff. Got to get the bed loose and back some so I can do the cab corners. Got all the interior out. Rebuilding the vent assys I managed to break the left side glass. Got to make another trip to a junk yard I found that has about 30 or more square bodies. Got to get some other stuff anyway, he has some later truck 4 spoke steering wheels he priced for $25. Found a nice step bumper for $25 a guy has, just got to go get it. Also found a spacer that my buddy had so I can get the 350 turbo in and still use my driveshafts. Here's some pics.
|
Re: My 84 K10 project
2 Attachment(s)
This is a budget deal, so I was planning on single stage urethane. What do you all think about these colors, 1st is from TCP Global, electric blue, 2nd from Summit Racing, bright blue metallic.
|
Re: My 84 K10 project
Holy crap, you have been busy!!! Wow and yard that has 30 squares, I would be in heaven. I might just have to take a trip down to Kentucky.
|
Re: My 84 K10 project
Quote:
|
Re: My 84 K10 project
Quote:
|
Re: My 84 K10 project
Nice work! Looks like a good solid truck to start with. I like the second blue also.
|
Re: My 84 K10 project
Thanks, that was my choice also. TKCR, come on down, just 1 question, can you block sand?
|
Re: My 84 K10 project
looking good brother! like the color!
|
Re: My 84 K10 project
Quote:
|
Re: My 84 K10 project
It's kinda like the wax on wax off.
|
Re: My 84 K10 project
Quote:
|
Re: My 84 K10 project
1 Attachment(s)
Looks like fun! I do love a big block!
TKCR, we have a yard here that has close to 100 squares. One of these day's I'll count just out of curiosity. Every type you can imagine, no super rare parts though. Even a short step 4x4! :) Mike |
All times are GMT -4. The time now is 09:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com