The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   Service 4wd (https://67-72chevytrucks.com/vboard/showthread.php?t=723825)

chinquipin 12-01-2016 09:13 PM

Service 4wd
 
I have a 06 z71. Randomly for the last year the service 4wd message has been coming on but would go off quickly. It has now came on to stay apparently. Any tips on troubleshooting?

izzy_Britton 12-03-2016 03:41 AM

Re: Service 4wd
 
check the grounds?

greasemonkey 12-03-2016 03:18 PM

Re: Service 4wd
 
On my 04 Tahoe, I had the message come up after driving through deep water and it would also get stuck in auto 4x (push button selector)..apparently the transfer case encoder motor gets water in the connector and doesn't work properly until it dries out. Just an idea if you have push button 4x. Mine cleared up in a few days of driving.

chinquipin 12-05-2016 01:47 PM

Re: Service 4wd
 
Thanks for the response guys. I've actually been too busy to do anything with it yet. I plan on checking grounds and connections. Could possibly be something getting wet. It came on last week when we got the first rain we have had in 6 months. What little searching I have done online I have found that several people have had problems with encoder in the transfer case and the push button switch itself. I figure I can replace both of these cheaper than having a "mechanic" look at it. Lol

GM-power 12-05-2016 02:29 PM

Re: Service 4wd
 
Get a scan tool and see what codes it has in it. That's what I would do before throwing parts at it.

chinquipin 12-05-2016 03:02 PM

Re: Service 4wd
 
Quote:

Originally Posted by GM-power (Post 7787568)
Get a scan tool and see what codes it has in it. That's what I would do before throwing parts at it.

I'm going to sometime this week. My cheapo tool didn't show any codes. Will have to run it by a friends house.

chinquipin 04-04-2017 09:38 PM

Re: Service 4wd
 
Update......so I finally read the codes and have C0300 and C0327. I ordered a motor from rock auto (dorman part number 600-910). I put it on and it will go in auto, 2 hi and 4 low. When you push 4hi it flashes and you can hear the motor but then it goes to "auto". I assume bad motor. Sent motor back and got another. It does same thing! Any ideas??

PT'S 70 CST 04-28-2017 07:44 PM

Re: Service 4wd
 
1 Attachment(s)
Buy a new push button switch and the message will be gone. My 01 Tahoe had the same problem and I did some Googling and that was the problem. Here you go on eBay. Dorman 901-062.

Flying Hamster 04-28-2017 08:19 PM

Re: Service 4wd
 
Just for fun, I'll mention that my truck does the "service 4wd" light too.
It's not a 4wd truck.
Makes me laugh every time it comes on.
Quality. Trying to evolve 4wd?

wbort27 06-14-2017 01:04 PM

Re: Service 4wd
 
my 2000 did same thing new dash switch no more problems


All times are GMT -4. The time now is 11:24 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com