The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)

- - NP205 U-bolt question (https://67-72chevytrucks.com/vboard/showthread.php?t=772732)

Speeding Dakota

10-06-2018 07:51 PM

NP205 U-bolt question

I lost the u-bolts that holds the front U-joint to the NP205 yoke. Any idea were I can find them? They seem to be 1 3/4" center to center
thanks

B. W.

10-06-2018 11:29 PM

Re: NP205 U-bolt question

Try Moog P/N 329-10. Any parts house should be able to cross that #.

Speeding Dakota

10-10-2018 10:50 PM

Re: NP205 U-bolt question

Quote:

Originally Posted by B. W. (Post 8358601)

Try Moog P/N 329-10. Any parts house should be able to cross that #.

Thanks - I went to NAPA and got the related MOOG 329-10, got home and found that they were to short to get the nut completely on. Any other suggestions?
based on the length of the 329-10 U-bolts (2" long) it seems I need something about 2-1/4" long

jeffahart

10-11-2018 12:55 AM

Re: NP205 U-bolt question

Hmmm, what kind of angle do you have up front? I think you should have a CV up front hooking to the 205. Then you would have four bolts going through the yoke holes and bolting into the CV flange. :chevy:

j

All times are GMT -4. The time now is 09:12 PM.