|
[PROJECT] Laidout53 Part II
Time for a new frame and link setup on the Dodge. This time im going to make the front crossmember and bag mounts, aswell as Im doing a parallel 4bar and panhard in the rear with bags and hopefully a small cantilever. Going to have sway bars front and rear. This time the running boards will lay out and im going to run 28.5" wide whites (3"). If time permits im going to chop (5") and body work it with some other body mods that I'll mention later when i get there, including custom inner fenders. Also will be doing a full interior. Hope to paint it Navy blue with a medium dark red interior, and flake the motor/trans medium red as well, as long as time permits...
Anyways heres the pictures of the tear down. Steel for the frame...( three 10' sticks of 2x4 and two 10' sticks of 2x6) http://i104.photobucket.com/albums/m...ge/10042-1.jpg Front clip off... http://i104.photobucket.com/albums/m...odge/10052.jpg Bed off... http://i104.photobucket.com/albums/m...odge/10051.jpg Cab striped and ready to be removed... http://i104.photobucket.com/albums/m...odge/10053.jpg http://i104.photobucket.com/albums/m...odge/10054.jpg Bare frame.... http://i104.photobucket.com/albums/m...odge/10056.jpg http://i104.photobucket.com/albums/m...odge/10055.jpg Bring in the frame table tomorrow and will be starting the frame this coming weekend... more to come. Justin |
Re: [PROJECT] Laidout53 Part II
I'll defenently be watching this one! You've got some mad skills and I like your style! Might I ask where's the '69?
Posted via Mobile Device |
Re: [PROJECT] Laidout53 Part II
the 69' is in the next stall out of the picture...
|
Re: [PROJECT] Laidout53 Part II
Subscribed.....
|
Re: [PROJECT] Laidout53 Part II
well i got started on the frame this afternoon got a fair share of it started.... hope to have the frame completely tacked up this weekend. Anyways heres the pictures from tonight.
Frame rails tapered... need to get some flat bar to cap'em... http://i104.photobucket.com/albums/m...odge/10057.jpg http://i104.photobucket.com/albums/m...odge/10059.jpg Starting to get them in place... http://i104.photobucket.com/albums/m...odge/10060.jpg http://i104.photobucket.com/albums/m...odge/10061.jpg http://i104.photobucket.com/albums/m...odge/10062.jpg http://i104.photobucket.com/albums/m...odge/10063.jpg http://i104.photobucket.com/albums/m...odge/10064.jpg http://i104.photobucket.com/albums/m...odge/10065.jpg More tomorrow....Enjoy Justin |
Re: [PROJECT] Laidout53 Part II
Looking good man :metal:
Subscribed! |
Re: [PROJECT] Laidout53 Part II
Well got more done this afternoon. Got the rear section of the frame together. Heres the pictures.
http://i104.photobucket.com/albums/m...odge/10066.jpg http://i104.photobucket.com/albums/m...odge/10067.jpg http://i104.photobucket.com/albums/m...odge/10068.jpg http://i104.photobucket.com/albums/m...odge/10069.jpg http://i104.photobucket.com/albums/m...odge/10070.jpg Got both sides gaps filled but i forgot to take a picture of the other one. http://i104.photobucket.com/albums/m...odge/10071.jpg Justin |
Re: [PROJECT] Laidout53 Part II
Man this is going to be killer!!! I'm following along also!
Posted via Mobile Device |
Re: [PROJECT] Laidout53 Part II
thanks olskool
|
Re: [PROJECT] Laidout53 Part II
Cool project....going to watch this one and push you to finish it fast so you can get back on the 69 ;) :chevy:
|
Re: [PROJECT] Laidout53 Part II
Ok I'm going to hold you too it...lol
Posted via Mobile Device |
Re: [PROJECT] Laidout53 Part II
awesome!!
|
Re: [PROJECT] Laidout53 Part II
thanks man
|
Re: [PROJECT] Laidout53 Part II
Well i had to move the rear section of the frame up, aswell as i got the rear tube notched for the exhaust tips to go under. Got the frame squared and picked up the steel for the A-arm crossmember(3x4x3/16). Next is some temp frame bracing and them on to finishing up the front frame horns.
heres the pictures... http://i104.photobucket.com/albums/m...odge/10072.jpg http://i104.photobucket.com/albums/m...odge/10073.jpg http://i104.photobucket.com/albums/m...odge/10074.jpg http://i104.photobucket.com/albums/m...odge/10075.jpg Justin |
Re: [PROJECT] Laidout53 Part II
Sweet here we go agian..
|
Re: [PROJECT] Laidout53 Part II
Well last night and tonight Ive been working on the front mustang II crossmember. Hers where im at currently...
Lower A-arm mounting holes sleeved... http://i104.photobucket.com/albums/m...odge/10076.jpg http://i104.photobucket.com/albums/m...odge/10077.jpg Smoothed... http://i104.photobucket.com/albums/m...odge/10078.jpg Spacers and ends tapered.... http://i104.photobucket.com/albums/m...odge/10079.jpg http://i104.photobucket.com/albums/m...odge/10080.jpg http://i104.photobucket.com/albums/m...odge/10081.jpg Welded... http://i104.photobucket.com/albums/m...odge/10082.jpg http://i104.photobucket.com/albums/m...odge/10083.jpg http://i104.photobucket.com/albums/m...odge/10084.jpg Well I hope to finish it tommorrow, just need to notch were the rack goes, make the rack mounts and cap the ends. Justin |
Re: [PROJECT] Laidout53 Part II
Looks good! So how many frames have you built from scratch? Did you just one day decide to build your own? Is this something you do for a living? Sorry for the questions.... Just curious.
Posted via Mobile Device |
Re: [PROJECT] Laidout53 Part II
Inquiring minds want to Know .....?
|
Re: [PROJECT] Laidout53 Part II
This is my third sratch built frame, the Chevy, a 28 Chevy are my other two...I don't do this for a living yet, however I wanna open my own hot rod shop one day.
Posted via Mobile Device |
Re: [PROJECT] Laidout53 Part II
Hell yeah! I don't think you'd have a problem getting customers with the work you do. Good luck!
Posted via Mobile Device |
Re: [PROJECT] Laidout53 Part II
thanks man
|
Re: [PROJECT] Laidout53 Part II
looking good man keep those pic's coming !!!
|
Re: [PROJECT] Laidout53 Part II
Thanks Ron
|
Re: [PROJECT] Laidout53 Part II
Much respect for doing it yourself!
|
| All times are GMT -4. The time now is 06:47 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com