1960 Impala dash in my 65???
1 Attachment(s)
I've read about the idea of doing this, but have not found any pix of it being done. Does anyone have any pix of it being done or any advice? I found a dash that is local with everything in it including the column. I have to go look at it. Here is a pic of what one looks like. Any advice would be appreciated. I'm a full time body man, but when it comes to customizing I'm a little slow.
|
Re: 1960 Impala dash in my 65???
I put one in my 86. What I did was split it down the middle then I had to cut a few inches off each end cap to line up the steering column with the speedo since I used the stock truck column. I then caped off the ends tacked each side in then filled in the middle. This is my first project truck with no experience so I'm no fabricator but I didn't think it was that difficult. Just make sure that you measure twice cut and weld once.
Sorry no pics but will get some for you.:waah: |
Re: 1960 Impala dash in my 65???
3 Attachment(s)
Thanks for the info. I went and got a dash today. Just contemplating my angle of attack.
|
Re: 1960 Impala dash in my 65???
What ever happened with this?
|
Re: 1960 Impala dash in my 65???
1 Attachment(s)
I finished it
|
Re: 1960 Impala dash in my 65???
Alan, your truck and build is still my favorite one I’ve read and kept up with on this site!
|
All times are GMT -4. The time now is 09:37 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com