The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 7 of 26 « First 23456 7 8910111217 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   The 60-66 "PAYING IT FORWARD" thread! (https://67-72chevytrucks.com/vboard/showthread.php?t=671262)

rudyyloverboiii 09-11-2015 12:40 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Isaiah92260 I have a wiring harness from my 64 if u want it. I'm in riverside.

rudyyloverboiii 09-11-2015 12:49 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
I also have the west coast mirrors That are a little worn down and a manual steering box that might need a new bearing. (Has play)

57chevy406 09-11-2015 07:40 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by 57chevy406 (Post 7302529)
Free 1961 gas tank with sending unit. Took out of my truck when I moved tank to rear under bed. No leaks sender works good has minor surface rust as it has been setting outside. Must pickup cannot ship.
Tank is gone. Went to Bill in Daytona

slepysal 09-11-2015 09:20 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
the windshield went to Josh jteck10.

jwcardy 09-12-2015 11:31 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by rudyyloverboiii (Post 7305287)
I also have the west coast mirrors That are a little worn down and a manual steering box that might need a new bearing. (Has play)
Pics of the mirrors?

Fogrocker 09-14-2015 02:06 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
>>>>

I don't have any pictures to post at this time, but while I'm thinking about it...I just did a front disc brake swap/lowering job on my 63 C10. I have all 4 factory coil springs along with the stock front spindles that are assembled with decent drum brakes. Very useable if someone has the need. Obviously too heavy to ship, but they are free if someone can use them. I'll haul them off to the scrap metal yard in a week or two.

Jerry

Did you get rid of these?
If not I could use them.

Fogrocker 09-14-2015 02:19 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by Crazy Rusty (Post 7186212)
Could this thread be stickied?

I have the original dash cluster for a 62 (fuel gauge, warning lights) with the cluster harness if anyone wants them.
Long shot I know... still got them?

jteck10 09-16-2015 06:57 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by slepysal (Post 7306034)
the windshield went to Josh jteck10.
thanks again sal! putting it in hopefully this week

Isaiah92260 09-16-2015 08:04 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by rudyyloverboiii (Post 7305283)
Isaiah92260 I have a wiring harness from my 64 if u want it. I'm in riverside.
Just sent you a PM!

LostMy65 09-18-2015 06:19 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Free
- Local - Oregon City
6 - Dually Wheels with nice tires. 8 Lug. 16.5 Dia.

LostMy65 09-18-2015 06:34 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by LostMy65 (Post 7267819)
SM465 - Supposedly recently rebuilt.
Come get it.
Oregon City

jteck10 09-19-2015 02:00 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by LostMy65 (Post 7313084)
Free
- Local - Oregon City
6 - Dually Wheels with nice tires. 8 Lug. 16.5 Dia.
shipping an option if i pay?

LostMy65 09-19-2015 02:26 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by jteck10 (Post 7313780)
shipping an option if i pay?
If I can just drop them off someplace and someone else takes care of them from there, sure.

jteck10 09-19-2015 03:15 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by LostMy65 (Post 7313794)
If I can just drop them off someplace and someone else takes care of them from there, sure.
ill pm you

HumphreyMurdoch 09-20-2015 09:02 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
I've got a few pieces I saved off my '62 that are free to anyone who can use them.

Rear step bumper. I had to cut off one of the brackets but its a straight cut and should be pretty easy to reuse. It's really heavy.

[IMG]http://i269.photobucket.com/albums/j...710_195053.jpg[/IMG]

[IMG]http://i269.photobucket.com/albums/j...710_195109.jpg[/IMG]

I also have both lower control arms with the torsion bars still in them, H032 center section and both axle shafts still available if anyone is interested.

I can post pics of the other stuff if needed.

I'd really prefer not to ship these, but if ya really need it I'll see what I can do.

62 bigwindow 09-20-2015 09:17 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
1 Attachment(s)
Factory gauges from I believe 64 with warning lights
was in a load of parts I got looks to be in decent shape but noticed the speedo needle is MIA..if anybody needs one for parts or can fix the needle you are welcome to it just toss in a little for shipping.. I am in NC

tigerburns 09-21-2015 11:00 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by 62 bigwindow (Post 7315122)
Factory gauges from I believe 64 with warning lights
was in a load of parts I got looks to be in decent shape but noticed the speedo needle is MIA..if anybody needs one for parts or can fix the needle you are welcome to it just toss in a little for shipping.. I am in NC
I could use it for some parts on one that I am restoring now. What would shipping to 29662 be?

matt_l 10-13-2015 10:59 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
1 Attachment(s)
Inline 6 250 casting number 366855. Still in truck and you can hear it run.. Has some issues and runs on the hot side. I am switching over to an LS motor, and if anyone can use it, come and get it. I am in Milford MI. You can also have the three speed manual transmission. If no one wants it, I am just going to scrap it.

blown240 10-13-2015 11:46 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Oh Man! I wish you were closer!

zplightning 10-14-2015 11:56 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.

I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar.

Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/

I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut)

Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you.

-Zac

Raptor0206 10-14-2015 12:07 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by zplightning (Post 7341014)
I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.

I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar.

Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/

I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut)

Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you.

-Zac
PM sent

zplightning 10-15-2015 01:27 PM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by zplightning (Post 7341014)
I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.

I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar.

Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/

I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut)

Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you.

-Zac
This is still available if anyone has a 63 or 64 truck to put this on (it won't fit other years)

1963c-10 10-16-2015 09:18 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by zplightning (Post 7342275)
This is still available if anyone has a 63 or 64 truck to put this on (it won't fit other years)
Im interested if its still available. PM sent

jlwilliams598 10-21-2015 08:03 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
62 bigwindow, did anyone get the gauges from you? I am in Charleston and could use them if you still have them.

slepysal 10-27-2015 10:33 AM
Re: The 60-66 "PAYING IT FORWARD" thread!
 
Quote:
Originally Posted by jlwilliams598 (Post 7348549)
62 bigwindow, did anyone get the gauges from you? I am in Charleston and could use them if you still have them.
I might have one I can check for you


All times are GMT -4. The time now is 12:37 PM.
Page 7 of 26 « First 23456 7 8910111217 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com