Re: post all bagged c10 here
 

My '62

Re: post all bagged c10 here
 

Looks good. I assume that is aired out front/rear? Just curious because that sure is lower than mine fully aired out in the front. I recently installed lower bag plates up front and they suck because I'm 4x4'n now at ride height. I've got 3" drop spndls w/slam bags. Crazy how much more drop you have with a slightly different setup. Oh well, the plates are going to get ditched soon anyway and shes coming down to earth!

Here's mine at full dump in front right now.

http://img.photobucket.com/albums/v6...052008/017.jpg

Re: post all bagged c10 here
 

Yes that's all the way down. The BS on the front is 4.5 (I think) and out back I know it is 5.0.

Re: post all bagged c10 here
 

Lower plates have substantial advantages over cups though. They don't move!!!! I made some for the front of mine and won't even consider a cup now! Not a single problem on this suspension to date. (crosses fingers)

Re: post all bagged c10 here
 

72 cab, 67 everything else all new metal except for cab. smoothed dash all is shaved. B&M 177 blown 383. goes to paint next weekend. will have more pics to show if anyone cares.



http://i64.photobucket.com/albums/h1...s/DSCF0472.jpg

http://i64.photobucket.com/albums/h1...0pics/logo.jpg

http://i64.photobucket.com/albums/h1...s/IMG_1759.jpg

Re: post all bagged c10 here
 

http://i64.photobucket.com/albums/h1...IMG_1292-1.jpg

slam RE7 bags. cut out lower control arm and welded in big pipe for cups. quick and dirty top plates.

sectioned the engine crossmeber to lay frame with our dragging control arms, without having to do a frame z.

Nothing special about the rear at all. clean and simple.

http://i64.photobucket.com/albums/h1...IMG_1297-1.jpg

Re: post all bagged c10 here
 

x2 what size pipe.

Re: post all bagged c10 here
 

I used 8" on mine

Build Link

Re: post all bagged c10 here
 

you got it man. 8" pipe, 1/4"" plate on bottom. doesnt rub anywhere at any height. the only thing i wish i did was to drill a hole to drain any water out of the bottom cup. I havent driven it yet but i am guessing there will be some water collecting in there. :metal:

Re: post all bagged c10 here
 

this is how it sits now
lots of more work needs to be done

Re: post all bagged c10 here
 

Give us some details.... What set up are you running? Its looking good!

Re: post all bagged c10 here
 

Finally got around to putting air ride on mine.

Re: post all bagged c10 here
 

well all i did was a 3" Z in the front and cut the rear of the frame and stackt it on top hers the back half of the rear both sides are plated with 1/2" plate

i will get pics of my front Z

Re: post all bagged c10 here
 

[IMG]http://i227.photobucket.com/albums/d...h_IMG_0707.jpg[/IMG]

Re: post all bagged c10 here
 

You posted a link to his gallery. Here's what I found there-


http://67-72chevytrucks.com/gallery/...403PM19591.jpg

Re: post all bagged c10 here
 

Here's a newer one of mine.
http://img.photobucket.com/albums/v4...ORANGE/003.jpg

Re: post all bagged c10 here
 

Heres my 66 Kustom

http://i66.photobucket.com/albums/h2...n_2006/035.jpg

Re: post all bagged c10 here
 

http://i209.photobucket.com/albums/b...0627081048.jpg

Updated of mine...

Re: post all bagged c10 here
 

My 68 on 22's

Re: post all bagged c10 here
 

Nice truck newage. Do you have any closer pics of the front clip. I am building a complete frame for my 64 Sub and using the stock front crossmember. Got any advise?

Re: post all bagged c10 here
 

Thanks to n2trux for getting my pic to work!!
Sorry,steveo10,but I dont have any pics of the interior right now.
It's not my truck, it belongs to the guy who is building mine.
He just finished up the final details on his this week and is taking it to the
///RA ALL STAR show in millington,tn this weekend.
He just registered to this site this week also,and will hopefully be posting some pics maby next week or so.

Re: post all bagged c10 here
 

better pic of the 68[IMG]http://i227.photobucket.com/albums/d...b/IMG_0705.jpg[/IMG]

Re: post all bagged c10 here
 

[IMG]http://i227.photobucket.com/albums/d...b/IMG_0707.jpg[/IMG]

Re: post all bagged c10 here
 

[IMG]http://i227.photobucket.com/albums/d...b/IMG_0706.jpg[/IMG]

Re: post all bagged c10 here
 

an the 86 im working on but i might sell it i bought a 95 c1500 i would like to do insed[IMG]http://i227.photobucket.com/albums/d...IMG_0812-1.jpg[/IMG]