|
What did you do to your truck today part IV
This is a continuation of this thread, from Part III. That thread has gotten huge so as we have done in the past, we'll start a new one. Let's keep this going. :metal:
|
Re: What did you do to your truck today part IV
I did this over the weekend but I finally got the 4 wheel disc brakes done and the new system bled! Ordered a PS pump bracket from Summit, so I can finish up the PS conversion. Slowly getting my panel going, since I have had it 5 years and never driven it. :(
Here's a pic, since everyone likes pics. http://gallery.lisaandmike.org/album...l/IMAG0815.jpg |
Re: What did you do to your truck today part IV
Thats a great looking Panel....
|
Re: What did you do to your truck today part IV
2 Attachment(s)
I upgraded to power disc brakes using mid 70's ball joints, spindles and power brake booster/master. Stops real nice now. It is funny how I still pump on the pedal when stopping.. :lol:
|
Re: What did you do to your truck today part IV
Order more parts for mine today. Should be here in a couple days and then some truck time this weekend. :metal:
|
Re: What did you do to your truck today part IV
3 Attachment(s)
Got the new Champion Radiator in and a few more little things like trans cooler lines, trans vacuum line, choke cable, replaced chrome water filler neck with black one, and got a repop battery hold down and dome light from Classic Parts.
|
Re: What did you do to your truck today part IV
Not a darn thing! Flu is kicking my arse!
|
Re: What did you do to your truck today part IV
3 Attachment(s)
Hope to pull this a block or so down the street to my house and turn my love of my '71 GMC into the start of a fleet!
Attachment 1619800 Attachment 1619801 Attachment 1619802 |
Re: What did you do to your truck today part IV
Just driving. I need to stop and work on some things I want to tweak.
|
Re: What did you do to your truck today part IV
Installed original refurbished radiator and new water pump. Then took the Mrs out to dinner for a test ride.
I have had the truck three years now and with that job complete - everything under the hood has been replaced with the exception of the motor itself. I can't wait for the road salting to end so it can be returned to daily driver status. |
Re: What did you do to your truck today part IV
Pumped the gas pedal twice, pulled out the choke, started it up and drove to work. Tried out my zip tie based, experimental Mexican blanket seat cover attachment system. So far, so good. :lol:
|
Re: What did you do to your truck today part IV
Elaborate more on your Mexican blanket/zip tie system shp4man. I have the blanket just need to secure it. Thx in advance.
|
Re: What did you do to your truck today part IV
1 Attachment(s)
Hid a '66 in some renderings at work...
|
Re: What did you do to your truck today part IV
That's awesome, Outlaw....LMAO!
Just put the repaired radiator back in the burb, filled with the green stuff, and cracked a beer. Ahhhhhh Finally FRIDAY! |
Re: What did you do to your truck today part IV
I picked up a couple 3rd row seats from a Tahoe. I will figure out which one I want to use as a back seat in my Panel truck...
http://i899.photobucket.com/albums/a...psfu8bulfh.jpg http://i899.photobucket.com/albums/a...psnkwvvvjw.jpg |
Re: What did you do to your truck today part IV
4 Attachment(s)
picked up truck from upholstery shop
|
Re: What did you do to your truck today part IV
Sweet interior. What are all the items under the dash there?
|
Re: What did you do to your truck today part IV
Rode to North Carolina today and picked up the new family member. A 65 Suburban. Now resting in Virginia.
Jimmy |
Re: What did you do to your truck today part IV
1 Attachment(s)
its a bowman color bar
|
Re: What did you do to your truck today part IV
2 Attachment(s)
I am attempting to graft the bracket for the steering column and master cylinder from a square body on my 1966 suburban.
|
Re: What did you do to your truck today part IV
1 Attachment(s)
Made the thin whitewalls a little wider.
|
Re: What did you do to your truck today part IV
3 Attachment(s)
Attachment 1621941
Attachment 1621943 Attachment 1621942 Took all the bondo that cracked off it was a 1/4 inch thick. |
Re: What did you do to your truck today part IV
1 Attachment(s)
repaired the worst hack job in the floor from the PO. I think they blindly measured for the stick shift, then blindfolded a 4 yr old and gave him a chain saw...
|
Re: What did you do to your truck today part IV
1 Attachment(s)
I have been there
Quote:
|
Re: What did you do to your truck today part IV
1 Attachment(s)
Trans tunnel made from an old piece of a car roof
|
Re: What did you do to your truck today part IV
Very nice work. :)
|
Re: What did you do to your truck today part IV
1 Attachment(s)
Installed my new glove box.Attachment 1623993
|
Re: What did you do to your truck today part IV
3 Attachment(s)
|
Re: What did you do to your truck today part IV
Set new glass in the wing and door window assemblies. Got the Nu Relics power unit installed and tested the switch that uses the original window crank handle.
http://i268.photobucket.com/albums/j...pslopcvhyi.jpg |
Re: What did you do to your truck today part IV
3 Attachment(s)
removed the passenger side inner rocker, outer rocker and cab corner. What a beating that was.
Welded in the new inner rocker in. The cab corner patch panel looks to be less than an ideal match, but I guess we'll. |
Re: What did you do to your truck today part IV
1 Attachment(s)
Attachment 1624661 Install my hei dizzy.
|
Re: What did you do to your truck today part IV
what belt line felts are you using and are you vent windows the ones that you can buy pre assembled and if so how do you like them?
Quote:
|
Re: What did you do to your truck today part IV
I had restored my original wing window assemblies many years ago. I was disheartened to see the damage a couple of local glass shops did to wing window frames of other people, so I decided to set the glass myself. I only have the door fuzzies on the inner side - the two different sets (Precision and Classic Parts) I had were both too thick for the outside. Not sure what I'm going to do...I might try to modify a set if passenger car outer rubber sweeps.
|
Re: What did you do to your truck today part IV
1 Attachment(s)
Installed driveshaft, new alternate bracket and put the hood back on by myself...I don't fully recommend it as a solo job.
Oh yeah, then i drove it for the first time with the engine swap complete! |
Re: What did you do to your truck today part IV
Nice NW Outlaw
|
Re: What did you do to your truck today part IV
1 Attachment(s)
Installed my bed floor after having it out for 8 years.
|
Re: What did you do to your truck today part IV
I called in sick today- bad cold. It's raining here all day. Wife's new car usually occupies the garage, but felt the need to get Ol'Blue out of the rain. :lol:
http://i36.photobucket.com/albums/e1...pshcfgeekk.jpg |
Re: What did you do to your truck today part IV
3 Attachment(s)
Finally assembled and leaving for the body shop for final paint.
|
Re: What did you do to your truck today part IV
5 Attachment(s)
Picked up a set of 22 inch transit wheels. Painted them white with Duplie-color color match and clear coated them with Spray Max 2K. Installed a set of Lionhart LH-EIGHT 265/35R22 tires and picked up and installed a set of Chevy Wheel Dress Up Kit with Polished Collar from Billet Proof Designs.
Changed out my broken speedo cable and ordered a new gas gauge. Next I will be dropping it with SS-7 Bags, Drop spindles and a C notch. |
Re: What did you do to your truck today part IV
3 Attachment(s)
went "Shopping" for a grille insert at a local yard. Found a complete '61 grille intact but the lower parts were pretty rusty, good thing i only needed the "Chevrolet" insert. Drilled out the rivets and was able to massage the aluminium back to straight enough.
Picked up extra bed fenders for future tubbing and a "non antenna" corner cowl. |
| All times are GMT -4. The time now is 02:16 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com