Your 60-66 bagged projects?
1 Attachment(s)
Lets see everyones pics of works in progress of 60-66 c10's. Trying to get ideas for my 64 shorty! I wanna lay frame on 22's lets see you front and rear setups.
|
Re: Your 60-66 bagged projects?
i have bagged the front of mine but not the back yet i got the bag mounts from suisidedoors.com and airlift 300 psi bags 3''drop spindles and 2 inch drop lower a arms take a look it lays the cross member.
http://groups.msn.com/ROLLNLOW/thec10.msnw |
Re: Your 60-66 bagged projects?
ya any pics would he a great help gonna try and do this soon
|
Re: Your 60-66 bagged projects?
http://i26.photobucket.com/albums/c1...w/P4080005.jpg
that's w/ the front end layed out, not z'd yet and no notch at all w/ axle laying against the frame, but has the front end laying w/ the crossmember on the ground, and here's what it looks like now, haven't done the upper triangulated 4 link yet so that's why its in the garage, and has a full notch. Still has headers laying on the ground and the full exhaust under the frame in the second pic. http://i26.photobucket.com/albums/c1...Attachment.jpg |
Re: Your 60-66 bagged projects?
leftcoast66 i love the truck do you have any better pics of the truck dropped with the back knotch done sorry the last pic is small and dark i am excited to see how much it lays as you can see in my pics the rear on mine isnt done yet so i am just tring to get inspired thanks
|
Re: Your 60-66 bagged projects?
|
Re: Your 60-66 bagged projects?
Quote:
|
Re: Your 60-66 bagged projects?
well, this panel was my project.
http://i46.photobucket.com/albums/f1...d_03/panel.jpg so now im looking for another one to chop and build the same as that one. in the mean time, im throwing a stepside on the panel frame. i did this pic with microsoft paint. http://i46.photobucket.com/albums/f1...ad_03/low1.jpg |
Re: Your 60-66 bagged projects?
that thing is awesome, I'm loving that setup. And I love all the pics of your old panel I saw in another thread a link u had. The setup was awesome. Good luck finding another panel and the truck is gonna be awesome I have no doubt about it.
|
Re: Your 60-66 bagged projects?
Hey SADPNL
here an old photo shopped pic of my junkpile might get ya stoked up for a low stepper and its chopped too , Looks SIIIICKK wheres my sawzall???? http://pic20.picturetrail.com/VOL159...7/68585252.jpg |
Re: Your 60-66 bagged projects?
|
Re: Your 60-66 bagged projects?
:aiiet: Here are a few more...
My other truck...http://i65.photobucket.com/albums/h211/rjm_sadler/5.jpg re-stepping the frame 1http://i65.photobucket.com/albums/h211/rjm_sadler/3.jpg re-stepping the frame 2http://i65.photobucket.com/albums/h211/rjm_sadler/4.jpg re-stepping the frame 3http://i65.photobucket.com/albums/h211/rjm_sadler/6.jpg new ride height, note cig dor comparisonhttp://i65.photobucket.com/albums/h211/rjm_sadler/2.jpg |
Re: Your 60-66 bagged projects?
A front shot for nowhttp://i65.photobucket.com/albums/h2...2150617101.jpg
|
Re: Your 60-66 bagged projects?
Just so you know...
I have less then $1500 into this truck. I bought it for $600, fixed the broken starter switch and it fired right up. i have seen the front dropmember set up, and after looking at how it was made(unbeliveably awesome!!!!)I decided to make my own. I just cant justify spending more then $600 at a time on my truck , and the last purchase was drop spindles and disc brake conversion. If anyone wants to know how I am doing it on a buget, just ask, it is not that difficult, you just have to be very resourceful!:cool: |
Re: Your 60-66 bagged projects?
prerunnerrob do you have some more pics of your truck that thing is sick the look you have is the one i am going for alsoslammed to the max!!!
|
Re: Your 60-66 bagged projects?
Quote:
Which part of SJ you in BTW? -Andy |
Re: Your 60-66 bagged projects?
I live downtown by Taylor and 7th street, and my shop is not too far off. Fell free to ask any questions, I will try to help you as best I can.
|
Re: Your 60-66 bagged projects?
Quote:
I am currently "between trucks" as i got rid of my '70 and started looking for, probably a '63 so i've been hanging around on here reading up on stuff. There seem to be a lot of 60-66 guys in SJ. |
Re: Your 60-66 bagged projects?
Quote:
|
Re: Your 60-66 bagged projects?
Quote:
:metal: |
Re: Your 60-66 bagged projects?
1 Attachment(s)
I seen this truck at viva but I got the picture off of the OSR forum.
|
Re: Your 60-66 bagged projects?
yall got some great lookin trucks i would love to hear how you doin it on a budget thats the way im gonna have to roll on mine wana get started soon on the dropfigure i should get it done before i start the body work right now i got about 800 bucks to start the bags and notches where is a good place to get bags set up and what do you recomend for size of the bags and compresses and tanks?
|
Re: Your 60-66 bagged projects?
Quote:
|
Re: Your 60-66 bagged projects?
2 Attachment(s)
here's a few photochops.... ChoppedDroppedPanel may recognize this photo.:cool:
|
Re: Your 60-66 bagged projects?
19GMC63 - I like that man. i have a new picture of MY truck, all ratty looking, i need to get it on here to see what itd look like.
|
All times are GMT -4. The time now is 07:29 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com