The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Factory Bucket Seats Pic Thread (https://67-72chevytrucks.com/vboard/showthread.php?t=471000)

Frizzle Fry 06-22-2011 01:44 PM

Factory Bucket Seats Pic Thread
 
Oklahomaduner's truck got me interested in factory buckets for these trucks. I guess they were put into a few late 66's, but rumored to have made it into a 65 or three... May end up being a very short thread because of how rare these things are, but post em if you got em!
Posted via Mobile Device

jimmydean 06-22-2011 01:59 PM

Re: Factory Bucket Seats Pic Thread
 
SCOTI has some sweet buckets he got out of the classified section and recovered. I love the buddy buckets, but couldn't justify the cost vs. the alternatives.

Frizzle Fry 06-22-2011 02:42 PM

Re: Factory Bucket Seats Pic Thread
 
I have two sets for my 68/69 Tahoe and may have one in the works for the 64 :devil: all need restoration.
Posted via Mobile Device

SCOTI 06-22-2011 11:26 PM

Re: Factory Bucket Seats Pic Thread
 
2 Attachment(s)
The 67-68 BB's look just right in the pre-67's IMO. I never knew they were offered when I had mine done & they bolted right in w/no mods. I went from the OE bench to the re-built buddies.....

jimmydean 06-23-2011 12:54 AM

Re: Factory Bucket Seats Pic Thread
 
SCOTI, you have any shots of them installed, or are they still in progress?

SCOTI 06-23-2011 10:09 AM

Re: Factory Bucket Seats Pic Thread
 
Quote:

Originally Posted by jimmydean (Post 4750727)
SCOTI, you have any shots of them installed, or are they still in progress?

I set them in place once they were finished but that was before the BBW conversion was completed & interior was painted. I'm still not done w/the cab floor so they've been sitting wrapped up in plastic. Once I get the cab swapped & can 100% determine my floor panels clear, I'll be able to get the insulation & carpet down to bolt them in.

RockTonka 06-23-2011 11:11 PM

Re: Factory Bucket Seats Pic Thread
 
3 Attachment(s)
These are the best pics we have of my son's truck in it's current state, sporting fresh carpet and new kicker panel covers. We hope to have the seats recovered within the next few weeks as close as possible to the stock style it has now.

Paulie 06-23-2011 11:24 PM

Re: Factory Bucket Seats Pic Thread
 
I really like those buckets

RockTonka 06-23-2011 11:47 PM

Re: Factory Bucket Seats Pic Thread
 
1 Attachment(s)
If its not to small to read, the "sport trim" lists the buckets...

Frizzle Fry 06-24-2011 10:27 PM

Re: Factory Bucket Seats Pic Thread
 
Just back from camping (off the grid). Thanks for the pics guys! Love the way those look in these :devil:

SCOTI, please post a shot or two of yours installed here when you have them in. I dig the covers you had made. What did they run you?

Frizzle Fry 06-24-2011 10:29 PM

Re: Factory Bucket Seats Pic Thread
 
Quote:

Originally Posted by RockTonka (Post 4752574)
If its not to small to read, the "sport trim" lists the buckets...

Wow, that's awesome! What's the matching firewall trim???

Frizzle Fry 06-24-2011 10:33 PM

Re: Factory Bucket Seats Pic Thread
 
Possibly some in a 65 here.

Frizzle Fry 06-24-2011 10:41 PM

Re: Factory Bucket Seats Pic Thread
 
...in another 66 GMC

Joemomma1 06-25-2011 01:12 AM

Re: Factory Bucket Seats Pic Thread
 
The main difference I see is the back of the center seat. It seems to fill the space more and is about as tall as the other two backs. Definately different than the later models. Im thinking about getting my center seat made bigger to look like that.

Frizzle Fry 06-25-2011 02:02 AM

Re: Factory Bucket Seats Pic Thread
 
Quote:

Originally Posted by Joemomma1 (Post 4754587)
The main difference I see is the back of the center seat. It seems to fill the space more and is about as tall as the other two backs. Definately different than the later models. Im thinking about getting my center seat made bigger to look like that.

Good eye. I'll have to check my sets for that.

Frizzle Fry 06-30-2011 10:25 AM

Re: Factory Bucket Seats Pic Thread
 
Any more out there?
Posted via Mobile Device

Frizzle Fry 07-04-2011 09:58 PM

Re: Factory Bucket Seats Pic Thread
 
Thought this might be a short thread. In all my years messing with these trucks the pics in this thread are the only 60-66 factory buckets I've ever seen.
Posted via Mobile Device

SCOTI 07-05-2011 12:26 AM

Re: Factory Bucket Seats Pic Thread
 
Quote:

Originally Posted by Frizzle Fry (Post 4771863)
Thought this might be a short thread. In all my years messing with these trucks the pics in this thread are the only 60-66 factory buckets I've ever seen.

People think 67-68 buddy buckets are rare. I'd hate to see the price tag on one of these set-ups....

Dinos63 07-05-2011 02:14 AM

Re: Factory Bucket Seats Pic Thread
 
i have never even seen thoses wow they are cool!!!

kieth 07-05-2011 10:56 AM

Re: Factory Bucket Seats Pic Thread
 
Did the GMC finally out do the chevrolet, we had something that they did not........wow.

Frizzle Fry 07-05-2011 03:22 PM

Re: Factory Bucket Seats Pic Thread
 
The link with the buckets in the 65 is a chevy.
Posted via Mobile Device

Clyde65 07-05-2011 05:25 PM

Re: Factory Bucket Seats Pic Thread
 
From what little I know I heard GMC, Buick, Pontiac and Olds got the stuff GM thought no one would really care about or like, but when they DID like the add ons, GM threw them on Chevy as quick as possible. for instance, GMC was "supposed" to be the luxury truck, cuz it had alot of chrome and such, nothing a typical farmer would need or want, then buyers started asking for that stuff, GM put the option in the Chevy book then.

chewychevy67 08-23-2011 10:43 PM

Re: Factory Bucket Seats Pic Thread
 
1 Attachment(s)
wow i was just reading this thread and i found on ebay what looks to be a correct center console for a pre 67 set of buddys. heres a link and some pic's
http://cgi.ebay.com/ebaymotors/_W0QQ...KQ3aMEWAXQ3aIT

Frizzle Fry 08-08-2013 01:38 PM

Re: Factory Bucket Seats Pic Thread
 
About to install a set in my 64. Any others out there?

newbe351 08-08-2013 04:18 PM

Re: Factory Bucket Seats Pic Thread
 
Mine's in shop as we speak. Dont know how to post pictures, but I can e-mail to someone to post for me. Should be out the end of next week. Problem was my padded door panels. Apparently the padding traps water pretty well. Rusted beyond use. I have one used panel and have ordered a repop panel. We'll see how they turn out.....


All times are GMT -4. The time now is 09:20 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com