Smitty's 67 Build
4 Attachment(s)
We are building a new Truck for Auto Cross and Road Racing probably a little Drag racing also. This will be a 1967 Chevy short bed.
Specs Engine 434 inch small block Billet Crank, Crower Rods, Ross Pistons, Dart Heads, Comp Roller cam and shaft rockers. 700 hp Trans T-56 with Dual disc clutch from American Power Train Rear End Moser Fab 9 with 35 spline axles and a Al center section with a Wavetrac center. Front suspension Rde Tech Arms, bags Triple adjustible shocks, sway bar amd a No Limit Steering Rack. Rear suspensiom No Limit Fat Bar with Ride Tech Triple adjustible Shockwaves and a No Limit Sway Bar. Brakes Wilwood 6 piston 14 inch rotors on front and 4 picton 14 inch rotors and the rear. Frame boxed with tublar cross member and a full cage all chrome moly. Starting point Attachment 913400 Boxing Channels Attachment 913401 Attachment 913402 Starting to Reinforce the frame Attachment 913403 |
Re: Smitty's 67 Build
4 Attachment(s)
Rear End parts from Moser
Attachment 913404 Attachment 913405 Dan from Clear Image Automotive Built me some custom Headers. Great place to deal with. Attachment 913406 1 3/4 inch tubes with merge collectors and v-band clams. Attachment 913407 |
Re: Smitty's 67 Build
3 Attachment(s)
I moved the engine as far back as I could without using the intake for a cup holder.
Attachment 913408 More Frame pics Attachment 913409 Attachment 913410 |
Re: Smitty's 67 Build
LOOKS like a BEAST !!
|
Re: Smitty's 67 Build
this is a wild thang I must keep watching
|
Re: Smitty's 67 Build
Nice! Like the plans for this one!!!
|
Re: Smitty's 67 Build
Lookin good Chris, I like the rear frame kick - nice
|
Re: Smitty's 67 Build
This is going to be a build to watch.... Nice!
|
Re: Smitty's 67 Build
chris, I remember that 67 gmc stepper in your avitar. Is it still around? Nicest one with a newer step bed I've seen.
|
Re: Smitty's 67 Build
Sweet project! In for the ride:)
|
Re: Smitty's 67 Build
4 Attachment(s)
Yes I still have the 67 GMC It was my first car purchase when I was 15 it will get a new make over as soon as this one is done.
Norwalk Drag 11.16 124 :devil: Attachment 913879 Sport Truck from back in the Day Attachment 913880 PHR tv Attachment 913881 Attachment 913882 |
Re: Smitty's 67 Build
4 Attachment(s)
Rob from No Limit built the fuel tank. It has baffles in it and extra ports for the return line and a #10 outlet welded right in. Super nice top quility stuff.
Attachment 913900 http://www.nolimitparts.com/ I found some cool hardware from Devil Accessories Attachment 913901 Attachment 913902 He also has some cool door pulls/handles. These should make is easy to get out and to close the door when strapped in. Attachment 913903 http://www.devilaccessories.com/ |
Re: Smitty's 67 Build
Damn! This is going to be sweet!
Posted via Mobile Device |
Re: Smitty's 67 Build
Very nice Chris! It's nice to see the right coast represented! Keep up the good work! I need to step up our progress!
|
Re: Smitty's 67 Build
Subscribed!
|
Re: Smitty's 67 Build
Chris, check out Speedway Engineering for a rear sway bar parts @ www.speedway1.com I'd use 1 1/4" 48 spline bars and arms. bars are avail in different lengths, 35", 36", 36.5", 37.5", 38.5".... An .095" wall bar is #608-095+length, a .125" wall bar is #608-125+length.
|
Re: Smitty's 67 Build
5 Attachment(s)
Here are some pics of the Fat Bar and the Shockwaves being installed. Just tacked everything together to make sure it all fits and works.
Attachment 914643 Attachment 914644 Attachment 914645 Attachment 914646 Attachment 914647 |
Re: Smitty's 67 Build
5 Attachment(s)
|
Re: Smitty's 67 Build
I am really enjoying your build looks nice but not as nice as you in your bikini in post 11.
|
Re: Smitty's 67 Build
I'm digging this.
|
Re: Smitty's 67 Build
Sweet
Posted via Mobile Device |
Re: Smitty's 67 Build
Looks awesome. Are you planning to notch the frame at all or do you think you will be low enough without it? What about bump stops?
Steve |
Re: Smitty's 67 Build
No notch in the frame we raised the rails 5.5 inches. There will be a bump stop above the axle. It should be 2 inches off the ground aired out.
|
Re: Smitty's 67 Build
2 Attachment(s)
Small update put the back brace on the housing. Got most of the panhard bar set up done.
Attachment 915206 Attachment 915207 |
Re: Smitty's 67 Build
5 Attachment(s)
Put it on the ground to see how it looks. It will sit about a inch lower when done.
Attachment 915505 Attachment 915506 Attachment 915507 Attachment 915508 Attachment 915509 Good view of how far back the engine is. |
All times are GMT -4. The time now is 10:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com