Well its about time to start a build thread...
This project started back in August, my dad and I dad bought the truck about a week before I left for college. We recently finished a 52 Ford F1, which the PO installed a fuel injected 4.6, a camaro rear end, fiberglass flip nose and more, but we spent all summer this year replacing the ****ty parts he bought at a junkyard. We decided this project was going to be different, so we found a rust free C10 in Wisconsin of all places. The truck is nothing more than just a rolling body when we picked it up, so we could build the whole thing the right way. A funny side story, the guy we bought it from was selling due to poor health, said he had a condition that made his lungs swell up and made it hard for him to breathe. He was 46 or 47 years old and claimed he lived in a retirement community. When we pulled up, we realized he lived in a trailer park and he was smoking a cigarette, he said it helped open up his lungs. He was an odd guy. Anyways back to the truck. My dad said he ran the vin and it came back as a 67, which is whats stated on the title, and has the big back window, but yet it has side marker lights..? Anyways, i only get to work on it on holiday breaks and the occasional weekend that I come home, but i feel like weve made some good progress so far. Ill post pics in the next few posts
|
Re: Well its about time to start a build thread...
Heres what we started with.
http://farm9.staticflickr.com/8479/8...a02a8dec88.jpg camera 244 by benny7012, on Flickr http://farm9.staticflickr.com/8504/8...1f6b51f0cc.jpg camera 248 by benny7012, on Flickr http://farm9.staticflickr.com/8080/8...c0b778e4b6.jpg camera 256 by benny7012, on Flickr http://farm9.staticflickr.com/8223/8...20f15ac964.jpg camera 255 by benny7012, on Flickr http://farm9.staticflickr.com/8058/8...b3c53a6e19.jpg camera 254 by benny7012, on Flickr |
Re: Well its about time to start a build thread...
And the first load of parts! CPP 5/5.5 inch drop kit, and 4 wheel disc conversion. But first to take the body off the frame and strip it down.
http://farm9.staticflickr.com/8498/8...33b87ba12f.jpg camera 257 by benny7012, on Flickr http://farm9.staticflickr.com/8201/8...55bfe1e640.jpg IMG_2736 by benny7012, on Flickr http://farm9.staticflickr.com/8358/8...b0f8a300b3.jpg camera 269 by benny7012, on Flickr http://farm9.staticflickr.com/8360/8...c9eb4a6caa.jpg camera 267 by benny7012, on Flickr |
Re: Well its about time to start a build thread...
Then rebuilding the front suspension..
http://farm9.staticflickr.com/8082/8...4730507033.jpg IMG_2735 by benny7012, on Flickr http://farm9.staticflickr.com/8481/8...1444393f38.jpg IMG_2737 by benny7012, on Flickr http://farm9.staticflickr.com/8217/8...ceb0bd0751.jpg IMG_2742 by benny7012, on Flickr http://farm9.staticflickr.com/8359/8...aa16092f16.jpg IMG_2746 by benny7012, on Flickr http://farm9.staticflickr.com/8204/8...2e3fc29878.jpg Untitled by benny7012, on Flickr |
Re: Well its about time to start a build thread...
And then the rears... We just installed the rearend today, it had to be rebuilt. To bad we found out that the diff cover we got from moser wont fit because of the panhard bar. Oh well. i guess well have to put it on the shelf and hope itll fit on the next truck we do.
http://farm9.staticflickr.com/8075/8...7d7183bff2.jpg IMG_2754 by benny7012, on Flickr http://farm9.staticflickr.com/8485/8...d5a330d2eb.jpg IMG_2756 by benny7012, on Flickr http://farm9.staticflickr.com/8488/8...6ed0f4177f.jpg IMG_2772 by benny7012, on Flickr http://farm9.staticflickr.com/8359/8...6f029928c0.jpg IMG_2782 by benny7012, on Flickr http://farm9.staticflickr.com/8343/8...33c8993e80.jpg IMG_2781 by benny7012, on Flickr http://farm9.staticflickr.com/8494/8...d12bdb1d04.jpg IMG_2832 by benny7012, on Flickr http://farm9.staticflickr.com/8063/8...b1a5f49dfd.jpg IMG_2831 by benny7012, on Flickr |
Re: Well its about time to start a build thread...
The engine is a 305 out of my neighbors 87 camaro, along with the 700r4 behind it. It was the cars third engine, and it didnt have many miles on it when he parked the car and pulled the motor and trans. Weve been talking about an ls swap down the road, but for $200 this motor will do just fine for now.
http://farm9.staticflickr.com/8337/8...097bd67bdf.jpg camera 261 by benny7012, on Flickr http://farm9.staticflickr.com/8080/8...d042c09e61.jpg camera 265 by benny7012, on Flickr http://farm9.staticflickr.com/8067/8...6f4d3a802c.jpg IMG_2771 by benny7012, on Flickr http://farm9.staticflickr.com/8222/8...1e928fa761.jpg IMG_2774 by benny7012, on Flickr http://farm9.staticflickr.com/8504/8...bc9d3461ed.jpg IMG_2809 by benny7012, on Flickr http://farm9.staticflickr.com/8220/8...11e0b20568.jpg IMG_2815 by benny7012, on Flickr http://farm9.staticflickr.com/8073/8...5666e0c8ca.jpg IMG_2838 by benny7012, on Flickr |
Re: Well its about time to start a build thread...
That brings us up to today, the valve covers and gas tank were installed tonight, and the rear end was finished up this afternoon. Were waiting on a shipment from classic industries with some morot mount bolts to throw the engine in, finish installing the brakes, and then i think it might be almost ready for body work.
http://farm9.staticflickr.com/8500/8...e099029523.jpg IMG_2834 by benny7012, on Flickr http://farm9.staticflickr.com/8351/8...ebd11731d8.jpg IMG_2835 by benny7012, on Flickr http://farm9.staticflickr.com/8067/8...54b94cb753.jpg IMG_2836 by benny7012, on Flickr |
Re: Well its about time to start a build thread...
Looks good!
|
Re: Well its about time to start a build thread...
Nice progress so far
Posted via Mobile Device |
Re: Well its about time to start a build thread...
what you have done looks just fine, my guess would be that someone put 68 sheetmetal on your 67.
|
Re: Well its about time to start a build thread...
Quote:
Posted via Mobile Device |
All times are GMT -4. The time now is 10:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com